New 2638 HST.

[BGL4BERVIN]

Traded in My 2014 3016 Shuttle Shift w/loader for a New 2638 HST Cab on Spet 13th 2019.
So far i love it! couple minor things i need to adjust for my larger and taller profile. but over all its good!
I kept all my attachments & implements ill update my info asap.
Haven't gotten to enjoy it much, been sick the last 3 days or so... but getting better slowly.

on another note, i will be happy to share my 3016 service manual. everything is on PDF Format. Covers 3016-3616 has service manual,loader manual,operators manual shuttle & HST versions.
also i can share my 2638 service manual if anyone wants it as well (PDF), i think i applies to the 2538 as well. just pm me and i can probably email them.

 

[BGL4BERVIN]

Traded in My 2014 3016 Shuttle Shift w/loader for a New 2638 HST Cab on Spet 13th 2019.
So far i love it! couple minor things i need to adjust for my larger and taller profile. but over all its good!
I kept all my attachments & implements ill update my info asap.
Haven't gotten to enjoy it much, been sick the last 3 days or so... but getting better slowly.

on another note, i will be happy to share my 3016 service manual. everything is on PDF Format. Covers 3016-3616 has service manual,loader manual,operators manual shuttle & HST versions.
also i can share my 2638 service manual if anyone wants it as well (PDF), i think i applies to the 2538 as well. just pm me and i can probably email them.

i would love to have a copy of your 2638 manual. bgl4bervin@gmail.com

 

[lynnforest]

Traded in My 2014 3016 Shuttle Shift w/loader for a New 2638 HST Cab on Spet 13th 2019.
So far i love it! couple minor things i need to adjust for my larger and taller profile. but over all its good!
I kept all my attachments & implements ill update my info asap.
Haven't gotten to enjoy it much, been sick the last 3 days or so... but getting better slowly.

on another note, i will be happy to share my 3016 service manual. everything is on PDF Format. Covers 3016-3616 has service manual,loader manual,operators manual shuttle & HST versions.
also i can share my 2638 service manual if anyone wants it as well (PDF), i think i applies to the 2538 as well. just pm me and i can probably email them.

 

[lynnforest]

Traded in My 2014 3016 Shuttle Shift w/loader for a New 2638 HST Cab on Spet 13th 2019.
So far i love it! couple minor things i need to adjust for my larger and taller profile. but over all its good!
I kept all my attachments & implements ill update my info asap.
Haven't gotten to enjoy it much, been sick the last 3 days or so... but getting better slowly.

on another note, i will be happy to share my 3016 service manual. everything is on PDF Format. Covers 3016-3616 has service manual,loader manual,operators manual shuttle & HST versions.
also i can share my 2638 service manual if anyone wants it as well (PDF), i think i applies to the 2538 as well. just pm me and i can probably email them.

I have a near new 2638 and have a fuel leak that needs repair so would very much appreciate the service manual pdf if still avail to my email of EPTS @ aol.com. Thank you in advance.

 

[sspenst]

I have a near new 2638 and have a fuel leak that needs repair so would very much appreciate the service manual pdf if still avail to my email of EPTS @ aol.com. Thank you in advance.

No Prob. check your PM

 

[K Sweeney]

Traded in My 2014 3016 Shuttle Shift w/loader for a New 2638 HST Cab on Spet 13th 2019.
So far i love it! couple minor things i need to adjust for my larger and taller profile. but over all its good!
I kept all my attachments & implements ill update my info asap.
Haven't gotten to enjoy it much, been sick the last 3 days or so... but getting better slowly.

on another note, i will be happy to share my 3016 service manual. everything is on PDF Format. Covers 3016-3616 has service manual,loader manual,operators manual shuttle & HST versions.
also i can share my 2638 service manual if anyone wants it as well (PDF), i think i applies to the 2538 as well. just pm me and i can probably email them.

I would love to get a copy of that manual. I have a 2638hst cab tractor and the manual that came with it is useless.

 

[famillepoiriercorbeil@out]

They also gave a useless manual. I would appreciate if you send me the service manual for the 2638 HST CAB
Regards,

email: famillepoiriercorbeil@outlook.com

 

[famillepoiriercorbeil@out]

Can I please have a copy of the service manual for HST 2638 please.

Thank you,

JP Corbeil

famillepoiriercorbeil@outlook.com

 

[Metsa Farm]

Traded in My 2014 3016 Shuttle Shift w/loader for a New 2638 HST Cab on Spet 13th 2019.
So far i love it! couple minor things i need to adjust for my larger and taller profile. but over all its good!
I kept all my attachments & implements ill update my info asap.
Haven't gotten to enjoy it much, been sick the last 3 days or so... but getting better slowly.

on another note, i will be happy to share my 3016 service manual. everything is on PDF Format. Covers 3016-3616 has service manual,loader manual,operators manual shuttle & HST versions.
also i can share my 2638 service manual if anyone wants it as well (PDF), i think i applies to the 2538 as well. just pm me and i can probably email them.

I would be interested in the 2638 Service Manual. I am new to blog sits so how do I PM you ?
PS Absolutely love my 2638 but more power would always be a good thing.

 

[duffer]

PS Absolutely love my 2638 but more power would always be a good thing.

I believe the 2638,2640 & 2645 all have the same engine and power train. I think the only difference is "tuning". You could ask your dealer to check your HP and perhaps give it a "nudge" upward.

After I had my ECU updated a few years ago, I swear I got another 5 hp out of it.

 

[Nick Danger]

No Prob. check your PM

Went and looked at a new 2638 today as I'm interested in purchasing a used one 800 miles away...

When the specs say 1 rear remote, is this the 3pt lift? I looked all over for one as I'll need one for the chute on a snowblower...

also, I'd be interested in your manual as I want to start getting familiar with it...

thx?

 

[duffer]

I don't remember seeing a true "remote" on the back of the 2638, unless it's a new spec for 2022 models. My 2538 doesn't have one, and I've looked at a few 2638's over the last 18 months and have never seen one. But I could be wrong.

 

[Ledgemere Farm]

The specs don’t list a remote for the 2638, the 2660 comes standard with one. I have a 1635 and the valve was extra equipment

 

[sspenst]

Oh yes they are optional on the 2638/2645

 

[Ledgemere Farm]

If you ever think you’ll want one, buy it new now. If you wait until later, when the model is discontinued, you’ll have to buy each individual part and it will be pricey (er)

 

[sspenst]

If you ever think you’ll want one, buy it new now. If you wait until later, when the model is discontinued, you’ll have to buy each individual part and it will be pricey (er)

totally agree. I financed my 2638 and i got all the options. 2 rear remotes,trailer socket kit(may never use lol) MID PTO KIT (probably never use either.......) Cruise control kit. added Rim Guard in rear tires as well.
About all you can get i think. best to get at purchase time rather than hem n haw over it later.

 

[Ledgemere Farm]

totally agree. I financed my 2638 and i got all the options. 2 rear remotes,trailer socket kit(may never use lol) MID PTO KIT (probably never use either.......) Cruise control kit. added Rim Guard in rear tires as well.
About all you can get i think. best to get at purchase time rather than hem n haw over it later.

My 2538 didn’t have cruise, I didn’t know I wanted it until I had to drive a couple miles on the road. Charlie Horse time!

 

[sspenst]

My 2538 didn’t have cruise, I didn’t know I wanted it until I had to drive a couple miles on the road. Charlie Horse time!

yes it is nice. I did have some minor issues with the cruise control magnet when I first got it home.... there's a nut that holds the magnet in a cup and it came loose from the vibrations and it came out far enough to get jammed under the forward pedal when i was reversing with my mower, scarred the heck outta me. i went and bought a couple NYLOCK nuts and have not had a issue since! (Knock on wood...) i did inform the dealer about that issue. I drove 10 hrs. to the dealer where I bought it from... shop the dealer not the machine as most would say.

 

[Birdhunter1]

I had about 300 hours on my 2638 from June of 2020 befire I put the cruise control kit on and I wish I had odne it when I got the machine. The remote I had put on a few months after I got it, we ordered the kit at purchase in June, it came in in August and in October I was going on a hunting trip so they dealer had my tractor that week to install the remote and fix a small warranty issue. I don't know what they guy is referring to as to it not being a 'true remote' but it seems to work like many other tractors I've been on the last 30 years except it has no locked on or float position.

 

[Paul Hurt]

No Prob. check your PM

Is there any chance that I can get a copy of your service manual pdf on the 2638
Email: pjhurt3159@gmail.com