New Bobcat BH76 Backhoe Hydraulic Connection to Tractor

[Snowlan]

For some reason adding the picture to the last post didn’t work. Here it is.

 

[Bobctat2035]

I have a backhoe on mine. The dealer had no idea how to make the hydraulics work with my third function front remote. We ended up super super rigging it but I can send pictures of how it’s mounted if you need help.

 

[Snowlan]

I have a backhoe on mine. The dealer had no idea how to make the hydraulics work with my third function front remote. We ended up super super rigging it but I can send pictures of how it’s mounted if you need help.

That would be great if you could send some pictures of the valve block connections. Your setup should show the intended flow. The kit came with fittings so with pictures I should be able to figure out the factory’s intent

 

[Bobctat2035]

Not sure if that would help since I have the third function all rigged together. I could snap picture of my instructions.

 

[Snowlan]

Not sure if that would help since I have the third function all rigged together. I could snap picture of my instructions.

Instructions are even better. There are only so many places to connect, so as long as I can see the intended connections I can figure it from there. Thanks!

 

[Bobctat2035]

Hope this helps

 

[Bobctat2035]

I’m going to scan the entire manual later. It’d be impossible to get it on without this thing.

 

[Snowlan]

Here you go. Good luck.

Bobcat BH76 Backhoe Manual 2020.pdf

drive.google.com

That is such a big help, thanks so much! Who knows how long I would have waited for the dealer to get that manual.

Running the chipper today, plan to get started on the backhoe tomorrow.

Can’t thank you enough.

 

[Snowlan]

Here you go. Good luck.

Bobcat BH76 Backhoe Manual 2020.pdf

drive.google.com

Success! Thanks for the instructions. I had to improvise the hydraulics a little because the instructions don’t take into consideration rear remotes. Wasn’t too hard, the red hose was supposed to connect to the Tank port on the loader valve, but that is now connected to the rear remote valve block so I just had to connect to the remote’s tank port instead.

Had a good afternoon getting used to the controls and taking care of a few jobs around the new driveway.

 

[Bobctat2035]

Woohoo! Glad you got it all figured out. How long did it take you to get that stump out?