New cab 5065M owner.

[AKfish]

Well... I done it! The decision between a cab 4520 or a cab 5065M is over! I bought a new 5065M from Mutton's in Fort Wayne, IN.

When my local dealer wouldn't budge from $52K on a 4520 optioned out the way I wanted - he pushed me right over to a 5065 for $58.4K delivered to Alaska from Mutton's.

I ordered the tractor with cab, buddy seat, 16x16 PowerReverser, MFWD, radio, mirrors, engine and tranny heaters, grill guard with brush guard, horn, PR modulator, front FEL 3rd SCV, 2 rear SCV, rear window washer-wiper, brake lights, iMatch quick hitch, ballast box, fender extensions, skid plates, auxillary work lights and lockable fuel cap.

563 NSL loader with joystick 3rd SCV function and skid steer attachment with 84" bucket.

Frontier RB2296 rear blade with hyd offset.

Shane thought it would be here by Mid-March.

No more fightin' snow and sleet in my Carrharts!! :thumbsup: Crank that heater up - Yeah!

AKfish

 

[kennyd]

Awsome! You know the rules about pictures when it gets here...

 

[RADIUM]

Congratulations sounds like you got a great deal, and for that little bit more money one extremely powerful tractor can't wait to see pictures. If I'm lucky I'll be closing on a 5095M myself I gave the dealer and offer I'll be calling later this afternoon to see if he excepted you certainly got a lot of extra options good for you just curious why you didn't get the self-leveling loader? Take care

 

[jenkinsph]

AKfish,
That will be a nice tractor for you.:thumbsup:

Just checking temperatures for the next 10 days on Weather.com, here in southern New Mexico we will be much colder than Kasilof.

On the rear blade, I am curious how you plan to set up the hydraulics? It would seem you need about four sets of valves on the rear for top link, tilt, offset and blade angle. If you option the third scv on the rear it would really help with the rearblade setup. I would suggest an electric diverter from Surplus Hydraulics that could be mounted directly on the blade to handle the offset and blade angle with less hoses. This could be plugged into the rear third scv and still have the first and second scv for top and tilt. I think this is important enough to make sure you have this option from the start. The 2296 looks to be a good choice for moving large amounts of snow and is well matched to your new tractor.

On my 110tlb I tied into the front auxillary circuit lines so that I have front and rear couplers. This was the easiest way to get to four rear sets of couplers. The 4520 has three sets of rear couplers and adding a forth and fifth coupler would be costly, haven't done it yet. If I had it to do over again I would have added the electric diverter valve to the 4520 regardless of the fact that I had no plans for the fel on it.

I think you will like the new cab enough that you will wonder why you didn't get a cab for the 110tlb. Enjoy your new tractor and get us some pics.

 

[JD5210]

Congratulations! Please share with us how a person in Alaska ends up working with a dealer in IN? Do you know if it will be shipped to Fort Wayne, then up to you or directly to dealer in your area?

 

[KB9UDE]

Sounds like a great machine!!

 

[Sharp Ranches]

Congratulations and I hope you like it because I just took delivery Saturday of a new JD 5083E with AF11G hydraulic snow plow blade (see picture) for the same purposes. I've never had a cab tractor before and must say I already really appreciate the comfort of heat!

 

[jenkinsph]

Congratulations and I hope you like it because I just took delivery Saturday of a new JD 5083E with AF11G hydraulic snow plow blade (see picture) for the same purposes. I've never had a cab tractor before and must say I already really appreciate the comfort of heat!

Nice tractor too.:thumbsup:

Let us know how the front bllades works out for you.

 

[bigbull338]

congrats on your new tractor.

 

[Zebrafive]

Fort Wayne is about 90 miles from me! Almost my backyard.

Congrats on your choices. I think you made a lot of good ones.
I think you will be glad you went with the 563 loader over the 553. Also skid steer and 3rd function for the loader. :thumbsup:

PR modulator, let us know how you like that, it would have been on my want list too. My choice of trans too! :thumbsup:

What PTO? I think 540 & 540E is std.

About the only thing I did not see on your list was wheel weights, but probably not needed with a cab.

Hard to believe delivery in only 6 weeks!

Will there be fighting for the buddy seat? That would have been my main reason to go bigger over the 4520!