RBManufacturing
Gold Member
- Joined
- Oct 31, 2000
- Messages
- 278
- Location
- Riverside, MIssouri
- Tractor
- Ford 8N / Kubota B 6200. Kubota B 7100. Modified wards lawn tractor. Souped up.
NEW DUAL AXIS SLOPE INDICATOR
- Thread starter RBManufacturing
- Start date
- Views: 9389
MJones
New member
I would be more than happy to test one and offer feedback.
Thanks!,
Mike
Thanks!,
Mike
RobS
Super Member
Hurry up with that testing Rick, I'm ready to BUY one! Looks very slick /forums/images/graemlins/smile.gif
markie61
Veteran Member
- Joined
- Mar 31, 2001
- Messages
- 1,362
- Location
- Northern Virginia
- Tractor
- 2019 Rural King RK55HC with Loader & Backhoe; 2001 New Holland TC40D with Loader
I replied under your first post attempt and sent a PM. I have LOTS of hills and would be very happy to test and provide feedback. I am averaging about 25 hours a month and the only level areas on my property are the floors in my house!
Thanks for your consideration!
Mark
Thanks for your consideration!
Mark
dourobob
Platinum Member
- Joined
- Mar 27, 2002
- Messages
- 670
- Tractor
- Wheel Horse 522xi
Hello Rick
As I have already indicated I am interested in testing a unit.
I have three tractors at present. Will the mounting bracket be easily moved from one to another or would I require two or three mounting brackets?
Thanks.
Bob
As I have already indicated I am interested in testing a unit.
I have three tractors at present. Will the mounting bracket be easily moved from one to another or would I require two or three mounting brackets?
Thanks.
Bob
OP
RBManufacturing
Gold Member
- Joined
- Oct 31, 2000
- Messages
- 278
- Location
- Riverside, MIssouri
- Tractor
- Ford 8N / Kubota B 6200. Kubota B 7100. Modified wards lawn tractor. Souped up.
HI GUYS,
I HAD TWO INQUIRIES WITHIN 5 MINUTES OF POST. I CAN
PROBABLY COME UP WITH A FEW MORE TO TEST. MY TESTS
HERE ON MY TRACTOR HAVE ALL BEEN GOOD. INDICATOR
POINTER MOVES DURING ACCELERATION, BUT NOT TOO
BAD DURING OPERATION. I CAN MAKE ONE THAT
COMPENSATES FOR ALL CONDITIONS, BUT PRICE WOULD
NOT BE ATTRACTIVE. TRIED TO MAKE ONE THAT WORKS
WELL, BUT NOT TOO EXPENSIVE. ONLY ONE MOVING
PART, AND WEATHER, ETC. HAS NO EFFECT ON INDICATOR.
HAVE NOT SET EXACT PRICE, BUT WILL BE VERY REASONABLE. PLEASE E-MAIL ADDRESSES TO ME FOR
SHIPPING TEST MODELS. RandBMfgInc@worldnet.att.net
I will only have a few to send for testing. first come first served. Mounting uses same bracket. New one attaches to
side of existing models using double sided adhesive. Thanks, Rick
I HAD TWO INQUIRIES WITHIN 5 MINUTES OF POST. I CAN
PROBABLY COME UP WITH A FEW MORE TO TEST. MY TESTS
HERE ON MY TRACTOR HAVE ALL BEEN GOOD. INDICATOR
POINTER MOVES DURING ACCELERATION, BUT NOT TOO
BAD DURING OPERATION. I CAN MAKE ONE THAT
COMPENSATES FOR ALL CONDITIONS, BUT PRICE WOULD
NOT BE ATTRACTIVE. TRIED TO MAKE ONE THAT WORKS
WELL, BUT NOT TOO EXPENSIVE. ONLY ONE MOVING
PART, AND WEATHER, ETC. HAS NO EFFECT ON INDICATOR.
HAVE NOT SET EXACT PRICE, BUT WILL BE VERY REASONABLE. PLEASE E-MAIL ADDRESSES TO ME FOR
SHIPPING TEST MODELS. RandBMfgInc@worldnet.att.net
I will only have a few to send for testing. first come first served. Mounting uses same bracket. New one attaches to
side of existing models using double sided adhesive. Thanks, Rick
Mike_Dumond
Gold Member
Cool, just what the doctor, (or paramedic) ordered. /forums/images/graemlins/smile.gif
OP
RBManufacturing
Gold Member
- Joined
- Oct 31, 2000
- Messages
- 278
- Location
- Riverside, MIssouri
- Tractor
- Ford 8N / Kubota B 6200. Kubota B 7100. Modified wards lawn tractor. Souped up.
Hi Guys,
WOW, I have had 17 requests for test units so far. Problem is,
I only have 5-6 units available for testing. When we made the
mold for the parts, they were not kicking out of mold very
well. Lost alot of parts. Was only able to salvage a few good
ones. I will be adding more kick out pins to the mold next day
or two. Will not effect the models looks or operation. Will only
allow more parts with less loss. I have 10 more from a
previous run, being tested on construction equipment at a
large construction company. Also, I have one on an off-road
truck being tested. Should have a limited supply available
late this week for sale. All testing is very important to us.
What may affect a model on a truck, may not affect a model
on a tractor. All tests so far have been positive results.
To make fair, I will be sending out test models to the first
ones that asked. Sorry guys. Thanks, Rick
WOW, I have had 17 requests for test units so far. Problem is,
I only have 5-6 units available for testing. When we made the
mold for the parts, they were not kicking out of mold very
well. Lost alot of parts. Was only able to salvage a few good
ones. I will be adding more kick out pins to the mold next day
or two. Will not effect the models looks or operation. Will only
allow more parts with less loss. I have 10 more from a
previous run, being tested on construction equipment at a
large construction company. Also, I have one on an off-road
truck being tested. Should have a limited supply available
late this week for sale. All testing is very important to us.
What may affect a model on a truck, may not affect a model
on a tractor. All tests so far have been positive results.
To make fair, I will be sending out test models to the first
ones that asked. Sorry guys. Thanks, Rick
Chief
Gold Member
I think I am getting to the party late but if you need more testers; I would love to test the indicator on my 4410. /forums/images/graemlins/smile.gif
