New Holland TC45D won't start fuel supply issue

[Happy in NC]

Does it just bolt in? It is next in line after the bowl. I was afraid to take it out.

 

[alexpops]

OK, seems you are not based on the LS R series. A quick google search shows that as your lift pump. New ones are available, but direct connect to fuel lines, not banjo fittings. and yes, appears to be bolted to the block, but to remove, you may need to remove the filter housing first for clearance.

Fuel Lift Pump fits New Holland T1510 TC30 TC33 TC33D Workmaster 55 130506351 fits Case 130506351 fits Ford 130506351 fits Case IH 130506351

Fuel Lift Pump for Case Skid Steer Loader(s) SR130, SR160, SR175, SV185, 410, 420, 420CT, Case IH Tractor(s) D33, D35, D45, DX31. Replaces Case OEM Number(s) 130506351, Replaces Case IH OEM Number(s) 130506351, Replaces Ford OEM Number(s) 130506351.

www.tractorpartsasap.com

Fuel Lift Pump for Ford Holland Tractor 2000 2 - F2NN9350AA C5NE9350A

Shop for the Fuel Lift Pump for Ford Holland Tractor 2000 2 - F2NN9350AA C5NE9350A at DB Electrical. The best selection, low prices, fast shipping, and great customer service.

www.dbelectrical.com

 

[alexpops]

looking at your pic, the DB may be the better fit based on bolt hole pattern. Not sure if they ship with a gasket, or if you need to order that separate. Messick's probably stocks as well.

 

[thepumpguysc]

And the bolts are METRIC..
It’s probably a 10mm..
To check it, disconnect or loosen the line from the injection pump and crank the engine..
U should get a good pulse of fuel at the injection pump inlet..if the supply pump is working..
Good luck.

 

[Happy in NC]

Thank you
I unhooked the line from the banjo bolt and I am getting fuel there but not all that much. Spiting out but not gushing out. I will pull it out and check it out.
I am getting some fuel from the banjo bolt but not much and barely a trickle out of the injector pump. None except some seepage at the injectors. I appreciate the answers. I had those pumps pulled up at some point but I wasn't sure if it was correct.

 

[thepumpguysc]

U should get wet with a loosened banjo bolt..
I’d start there..

 

[Happy in NC]

That's what I thought. The only thing I didn't check yet before banjo was the lift pump.
First thing on tomorrows agenda

 

[Happy in NC]

Well I got it fixed today after waiting a week on parts. It was the fuel lift pump and all seems good again

 

[alexpops]

Congratulations. Granted, a pain in the butt (diagnosing/second guessing/waiting on parts & hoping they fit/are the right ones/checking for leaks/etc.), but something about fixing it yourself that gives a feeling you don't get just paying someone else to take care of your stuff. Always makes me want to do my best Tim Allen imitation for the wife.

 

[Happy in NC]

I meant to thank you Alex. You sent me in the right direction but the parts you linked were for a 3 cyl. Thanks for your input