crzysnake137
Bronze Member
- Joined
- Dec 31, 2005
- Messages
- 51
- Tractor
- John Deere 125
Does any1 know if the 2520 is compatible??
New iMatch AutoHitch
- Thread starter sklunk
- Start date
- Views: 14589
Chris2520
Platinum Member
Chris2520 said:I ask my dealer about this. and thay said it never came to pass. there was a problem with it. i wanted one.and though it was on the website. deere never shipped them out. and he thought the project was going to be scraped. I guess we will see.
Chris....
My opoligies to everyone. I was completely wrong..
after looking at this closely. this was not what i was talking about.
this is a completely different tool . what i thought this was . is the single lever IMatch quick hitch. JD acualy had it on there website and the attachment book. but my dealer said it just never came to pass.
and you could not order one. it was not this PTO shaft connector.
so i was wrong....
Chris...
crzysnake137
Bronze Member
- Joined
- Dec 31, 2005
- Messages
- 51
- Tractor
- John Deere 125
Does any1 known how it works exactly?
HappyCPE
Gold Member
Chris2520 said:PS... What is RFDTV.....
Chris....
This is RFDTV:
RFD-TV - Rural America's Most Important Network
Interesting change from the usual "chewing gum for the eyes."
froggy
Veteran Member
- Joined
- Jul 14, 2001
- Messages
- 1,075
- Location
- Cooke County, Texas
- Tractor
- JD4320 with TNT, electric diverter, cruise control and air suspension seat.
Amazing, I want one!
AKfish
Super Member
- Joined
- Oct 1, 2004
- Messages
- 5,419
- Location
- Alaska
- Tractor
- JD 5115M; JD 110 TLB; JD 4720; Ford 9N; JD X300R
That a real slick setup!! Definitely something to consider should anyone be lookin' to upgrade a newer tractor or when buyin' a new CUT.
And RFDTV is a great channel!! If you have a chance to get that on your cable or satellite -- it's worth it.
AKfish
And RFDTV is a great channel!! If you have a chance to get that on your cable or satellite -- it's worth it.
AKfish
matthew3120
Silver Member
- Joined
- Jul 15, 2005
- Messages
- 184
- Location
- Ashland Wisconsin
- Tractor
- 2007 John Deere 4120 4WD 12/12 Power revser
Hi all,
I was looking at that autohitch and went on the site to find it like $380.00 for the autohitch and another $270.00 RC1070 rotory cutter Attachment so you can hook it up I think i will just get off the tractor and put on t the PTO myself.
Matthew3120
I was looking at that autohitch and went on the site to find it like $380.00 for the autohitch and another $270.00 RC1070 rotory cutter Attachment so you can hook it up I think i will just get off the tractor and put on t the PTO myself.
Matthew3120
Ledgemere Farm
Veteran Member
a must have for anyone changing implements often. for me, my backhoe is on most of the time so not worth it.
tuolumne
Gold Member
Hear, hear. I wish I could leave the 3PH draft arms in place with the backhoe on. Hooking up or removing the backhoe has been a matter of 2-3 minutes. I've got the 3ph assembly down to about 10. For the bolted keepers on the main pins, can a lynch pin be substituted for the nut and bolt? Still, for me this assembly takes all the time and an I-match would just add an extra step. I haven't had a problem jostling implements into place, even on sloped ground. It is significantly easier with a helper to line things up while I lift, backup etc.
