New Kubota..loader edge?

[Cycledude]

how flat are your area's? it has to ride on the shoe's, if you have high center points your going to need at least 3

i have only 2 on my 54 inch bucket, it works fine, i run in float 95% of the time.

I would say my yard is mostly reasonably flat, ordering 3 instead of 4 tamers would save about $72 so total cost would be about $216.93

I do really like how easily those tamers appear to be installed or removed.

The first 29 years I lived here a 8N Ford tractor and a rear blade was the main way I plowed my snow, last year I bought a new tractor with front loader and rear blower and it’s been working great

 

[LittleBill21]

I would say my yard is mostly reasonably flat, ordering 3 instead of 4 tamers would save about $72 so total cost would be about $216.93

I do really like how easily those tamers appear to be installed or removed.

The first 29 years I lived here a 8N Ford tractor and a rear blade was the main way I plowed my snow, last year I bought a new tractor with front loader and rear blower and it’s been working great

use code ttwt, it will save another 5%, yea single bolt, per tamer, each side, i put them as about 2 inches from the edge

 

[Cycledude]

Ordered 3 4 inch tamers, thanks to your discount code I saved $9.75 total price $209.32

 

[LittleBill21]

Ordered 3 4 inch tamers, thanks to your discount code I saved $9.75 total price $209.32

hope they work out well for you

 

[pdolson]

I have a mile long gravel driveway. A large yard and mailbox area to clear. I NEVER considered my bucket for snow removal. Good HD rear blade and go like the wind. No stopping to dump the bucket - snow is curled off the side of the driveway, yard and mailbox area - clear, unobstructed view out front.

I simply don't have time to play with the snow with my bucket.

Ok! Where do I get a rear blade? I'm looking at the diy pipe.weld thing too.

 

[pdolson]

I would say my yard is mostly reasonably flat, ordering 3 instead of 4 tamers would save about $72 so total cost would be about $216.93

I do really like how easily those tamers appear to be installed or removed.

The first 29 years I lived here a 8N Ford tractor and a rear blade was the main way I plowed my snow, last year I bought a new tractor with front loader and rear blower and it’s been working great

A twisty humped long driveway...

 

[North to Alaska]

Here is a video of my tractor with the edge tamers. I have just two on (recommendation was three)
Gravel drive.works well in light and fluffy or in heavy snow too.

 

[LD1]

Ok! Where do I get a rear blade? I'm looking at the diy pipe.weld thing too.

Craigslist, Market place, tractor dealer, Implement dealer

 

[SARG]

I like the Snow Edge. I tried all the different pipe techniques without success.

Ratchet Rake, LLC - Tractor rake, Snow Edge, Tractor attachment, Bucket attachment, Loader, Skid loader, Kubota, Skid steer, Landscape rake, Brush remover, York Rake, Harley Rake, Rock Rake, Tractor rake attachment, Construction attachment, New Holla

www.ratchetrake.com

 

[Egon]

If edge tamer’s are really required a couple of pieces of square tubing bolted to the underside of the bucket should work. Just put a strap of steel on the tubing ahead of the bolt heads so they don’t leave scratch marks. Or drill a larger hole to access the bolt head.

Rear blades don’t work well if the snow gets too deep to drive thru or the side windrows get too large/frozen to move. They may also turn a lighter tractor sideways With a heavy load.

One may notice municipal graders just have a normal blade or serrated cutting edge for moving snow/ice.