New Rops on CK30
- Thread starter HODAK
- Start date
- Views: 1885
shoppintractors
Veteran Member
- Joined
- Jul 31, 2003
- Messages
- 1,219
- Location
- Southeast, Michigan
- Tractor
- Shoppin', Formerly Ford 1220, 7106 FEL, 60
Glenn,
Welcome to TBN & Congratulations on your purchase! /forums/images/graemlins/cool.gif
Thanks for posting and keep the pictures coming.
Don
Welcome to TBN & Congratulations on your purchase! /forums/images/graemlins/cool.gif
Thanks for posting and keep the pictures coming.
Don
Bowhunter
Gold Member
Why does Kioti have their ROPS fold this way instead of folding it tight against itself like NH?
</font><font color="blue" class="small">( Why does Kioti have their ROPS fold this way instead of folding it tight against itself like NH? )</font>
Because this way, it's more noticeable that you don't have it the full up position, and maybe you'll be more likely to put it all the way up with that top part sticking out. John
Because this way, it's more noticeable that you don't have it the full up position, and maybe you'll be more likely to put it all the way up with that top part sticking out. John
Bowhunter
Gold Member
Maybe. How far does it stick out the back? It looks like if you were to park it in a tight garage, you'd have to watch that you didn't hit something with it. It also seems that this design would put a lot more stress on the joint than if it were hanging straight down.
I hope no one takes this as bashing the tractor. I will be in the market for a new tractor in a couple of years, and the CK30 is one of the top two on the list right now. I am just curious about this one feature. Well, this one feature, as well as the merit of having the FEL hydraulic lines sticking up above the loader arm. /forums/images/graemlins/wink.gif
I hope no one takes this as bashing the tractor. I will be in the market for a new tractor in a couple of years, and the CK30 is one of the top two on the list right now. I am just curious about this one feature. Well, this one feature, as well as the merit of having the FEL hydraulic lines sticking up above the loader arm. /forums/images/graemlins/wink.gif
</font><font color="blue" class="small">( I hope no one takes this as bashing the tractor. I will be in the market for a new tractor in a couple of years, and the CK30 is one of the top two on the list right now. I am just curious about this one feature. Well, this one feature, as well as the merit of having the FEL hydraulic lines sticking up above the loader arm. )</font>
I sure don't take it that way. You asked a good, legitimate question. It doesn't stick far out and if you can get your tractor's rear end in, the ROPS isn't going to hit anything. As far as stress goes, you're talking about a very strong piece of metal, and the mounting is just as tough. The little stress that might be there wouldn't be nearly as much as turning the tractor over would cause, and they still hold up. So relax about that part.
John
I sure don't take it that way. You asked a good, legitimate question. It doesn't stick far out and if you can get your tractor's rear end in, the ROPS isn't going to hit anything. As far as stress goes, you're talking about a very strong piece of metal, and the mounting is just as tough. The little stress that might be there wouldn't be nearly as much as turning the tractor over would cause, and they still hold up. So relax about that part.
John
RedDog
Platinum Member
</font><font color="blue" class="small">( Why does Kioti have their ROPS fold this way instead of folding it tight against itself like NH? )</font>
Mine will fold against itself. /forums/images/graemlins/grin.gif I don't want to do it now since the sunshade is on. /forums/images/graemlins/tongue.gif
I do think it is foolish to have it stick out the back. /forums/images/graemlins/crazy.gif
RedDog
Mine will fold against itself. /forums/images/graemlins/grin.gif I don't want to do it now since the sunshade is on. /forums/images/graemlins/tongue.gif
I do think it is foolish to have it stick out the back. /forums/images/graemlins/crazy.gif
RedDog
MaineHowler
New member
- Joined
- Apr 11, 2005
- Messages
- 7
- Tractor
- Kioti CK30HST
With the naked eye, it looks like it only sticks out about 6 inches more than the 3 pt hitch arms. And it didn't seem heavy enough to cause any stress problems. Everything is still pretty heavy duty.
Glenn
Glenn
</font><font color="blue" class="small">( With the naked eye, it looks like it only sticks out about 6 inches more than the 3 pt hitch arms. )</font>
That's about what I figured it to be when I looked at them today. It does seem odd that it stops half way, but I kind of like it. It really seems that if you weren't really paying attention, you might think it's up if it folded in half, but not with it sticking out the back!
John
That's about what I figured it to be when I looked at them today. It does seem odd that it stops half way, but I kind of like it. It really seems that if you weren't really paying attention, you might think it's up if it folded in half, but not with it sticking out the back!
John
