Backhoe NH Backhoe Mounting

Anonymous Poster · Apr 27, 2003

Has anyone had any problems with the NH Backhoe mounting to the tractor and stressing the 3pt mount. Kub / JD seem to point out the fact that they have a specific mounting kit that eliminates frame twisting, I see nothing for NH. This is what I would call the show stopper for this product and I would like to get past the issue and buy NH..

Thanks for any feedback..

MikePA · Apr 28, 2003

Which NH backhoe and which NH tractor?

spencer200 · Apr 28, 2003

The New Holland backhoes are frame mounted to the tractor.
Initial installation takes 4-5 hours after that the backhoe comes on and off in 5-10 minutes. New Holland backhoes are also the only backhoes that are approved by New Holland engineering for warranty purposes. Hope this helps.

Anonymous Poster · Apr 28, 2003

TN 75 and the 759C backhoe. The NH guy really didn't describe it all that well so any information would be appreciated.

Rowski · Apr 29, 2003

I have a 759C. It on my NH2120 with subframe mount. I do not have to remove any of my 3pt arms to hook up. Takes a few minutes longer to hook up than to unhook. Usually areong the 10 to 15 minute range. I'm pretty sure the TN75 with 759C is a 3pt mount.