Backhoe NH Backhoe Mounting

   / NH Backhoe Mounting #1  

Anonymous Poster

Epic Contributor
Joined
Sep 27, 2005
Messages
29,678
Has anyone had any problems with the NH Backhoe mounting to the tractor and stressing the 3pt mount. Kub / JD seem to point out the fact that they have a specific mounting kit that eliminates frame twisting, I see nothing for NH. This is what I would call the show stopper for this product and I would like to get past the issue and buy NH..

Thanks for any feedback..
 
   / NH Backhoe Mounting #2  
Which NH backhoe and which NH tractor?
 
   / NH Backhoe Mounting #3  
The New Holland backhoes are frame mounted to the tractor.
Initial installation takes 4-5 hours after that the backhoe comes on and off in 5-10 minutes. New Holland backhoes are also the only backhoes that are approved by New Holland engineering for warranty purposes. Hope this helps.
 
   / NH Backhoe Mounting
  • Thread Starter
#4  
TN 75 and the 759C backhoe. The NH guy really didn't describe it all that well so any information would be appreciated.
 
   / NH Backhoe Mounting #5  
I have a 759C. It on my NH2120 with subframe mount. I do not have to remove any of my 3pt arms to hook up. Takes a few minutes longer to hook up than to unhook. Usually areong the 10 to 15 minute range. I'm pretty sure the TN75 with 759C is a 3pt mount.
 

Tractor & Equipment Auctions

2014 STONE RIDGE 38FL 5TH WHEEL CAMPER (A50854)
2014 STONE RIDGE...
2020 FABRIQUE H9618TRTV-100 18FT ENCLOSED TRAILER (A51222)
2020 FABRIQUE...
INGERSOLL RAND G40 GENERATOR (A50854)
INGERSOLL RAND G40...
2018 JOHN DEERE 204L WHEEL LOADER (A51242)
2018 JOHN DEERE...
2007 Mitsubishi Fuso FE84D 16ft Dovetail Flatbed Truck (A50323)
2007 Mitsubishi...
100 GAL FUEL TANK (A50854)
100 GAL FUEL TANK...
 
Top