No NX4510 around?

[Hawk3145]

Hello everyone, I have read thousands of posts on this site and want to say it has been crucial in making decisions! After reading, doing research and actually sitting in various machines I ended up wanting the NX4510 with cab and hst. After the several month process of me looking I finally found the dealer that I liked and wanted to order one with 2 remotes and 3rd function. I then got.a call from them stating that there is none at the factory plant and Kioti can not give a estimate on when they will receive them from Korea. The dealer did say they are gonna try and locate one from another dealer but so far no luck. My question is this normal and if so does anyone have any idea what the wait time is? My very close second choice was a LS XR4145 but liked they layout of the cab in the DK version so only imagine the NX would be better.

 

[coobie]

Hello everyone, I have read thousands of posts on this site and want to say it has been crucial in making decisions! After reading, doing research and actually sitting in various machines I ended up wanting the NX4510 with cab and hst. After the several month process of me looking I finally found the dealer that I liked and wanted to order one with 2 remotes and 3rd function. I then got.a call from them stating that there is none at the factory plant and Kioti can not give a estimate on when they will receive them from Korea. The dealer did say they are gonna try and locate one from another dealer but so far no luck. My question is this normal and if so does anyone have any idea what the wait time is? My very close second choice was a LS XR4145 but liked they layout of the cab in the DK version so only imagine the NX would be better.

Michigan Iron & equipment (kioti dealer) located in Morrice mi. shows 3 units in stock.

 

[rhunt]

You did not give us your location yet so we have difficulty locating one for you. As coobie stated, Michican Iron has one. Bob

 

[Hawk3145]

Ok thank you, I did get a price from them online only but they were higher than the Armada dealer I was quoted. The tractor ultimately will be in the Lewiston area and at least Armada was was on the way to and from the cottage. If I dont hear back or get an ETA might have to make the trip over there to form up a price.

 

[Hawk3145]

Sorry I'm in Chesterfield area and will have to update my profile.

 

[coobie]

Ok thank you, I did get a price from them online only but they were higher than the Armada dealer I was quoted. The tractor ultimately will be in the Lewiston area and at least Armada was was on the way to and from the cottage. If I dont hear back or get an ETA might have to make the trip over there to form up a price.

Go visit or call Bob and Denise (owners) at Michigan Iron & equipment.I am pretty sure they will match or beat armada dealers price.Purchased my DK40 and many implements from them great sales, service and parts.They are a 5 paw Kioti dealer to boot.

 

[Sunnenman]

I was just at Micigan Iron yesterday and they had a NX4510 with a cab there. It was too big for my needs so I purchased a DK4710 with cab. They will delivery next week. I had them add a second rear remote, extendable 3 point links, cruise and linked pedal. Great customer service from them.

 

[Hawk3145]

Ok thanks Sun. I've played with the dk4710 but thought the NX is only a little longer. It's looking like gonna have drive the 2 hours to actually see one in person when my schedule allows.

 

[Hawk3145]

Ok thanks Sun. I've played with the dk4710 but thought the NX is only a little longer. It's looking like gonna have drive the 2 hours to actually see one in person when my schedule allows. One question tho does the NX have the phone or aux jack to plug in for the radio like the DK has?

 

[Sunnenman]

I don't believe if has the aux jack. There is a good video on Youtube comparing the DK with the NX. My DK will be delivered later this week. Can't wait.

 

[Threepoint]

Hawk3145 - I, too, recommend MIE as a first-rate business to deal with.

If you do end up deciding on an NX, I suggest you also ask the dealer to install three rear remote valve sets, rather than just two as you have in mind. It will cost less to do it now, and you can then dedicate the first two sets to a hydraulic top 'n tilt system. That will leave the third set free for other purposes later (e.g. a hydraulic offset cylinder for a rear blade, as I do, or a hydraulic log splitter). You can't do it on the DK10 series due to the way the OEM valves are set up.

BTW, MIE builds nice top 'n tilt setups for the Kiotis at reasonable prices and quick turnaround. For the NX and DK10 series, a double-piloted check valve comes standard on their top link cylinder, and as an option on the side link cylinder.

Note: The last I checked, North America Kioti lists only two rear remotes as options for the NX series. However, you can add a third set just by ordering a second No. 2 remote kit, which includes the valve body and cable kit. The third valve body bolts right up to the first two. It just requires slightly longer, hardened bolts, 8.8 or better, long enough to extend through all three valve bodies. Those are available at Fastenall, etc. TBN member MinnesotaEric was the first to figure all this out, five years ago!

 

[Hawk3145]

Well I went to MIE and they were really nice and knowledgeable. I did get quotes for the NX4510 and DK4710se. What I had them price out was tractor with loader 2 sets of remotes,hydraulic top link, 3rd function, loaded tires, rear wiper, 60" grapple and a set of pallet forks. Unfortunately they were $1305 more expensive out the door pricing on the DK and $1722 more than Van Paemel equally equipped out the door pricing. I can get a NX5010 from Van Paemel for $692 more than the quoted price of 4510 from Michigan Iron Equipment so that seems like a good deal for 5 more hp. Just wanted to keep everyone that posted up to speed as I appreciate the feedback!

 

[coobie]

Well I went to MIE and they were really nice and knowledgeable. I did get quotes for the NX4510 and DK4710se. What I had them price out was tractor with loader 2 sets of remotes,hydraulic top link, 3rd function, loaded tires, rear wiper, 60" grapple and a set of pallet forks. Unfortunately they were $1305 more expensive out the door pricing on the DK and $1722 more than Van Paemel equally equipped out the door pricing. I can get a NX5010 from Van Paemel for $692 more than the quoted price of 4510 from Michigan Iron Equipment so that seems like a good deal for 5 more hp. Just wanted to keep everyone that posted up to speed as I appreciate the feedback!

I would let MIE know the price difference to see if they can match it.I have dealt with both establishments my choice is MIE..

 

[Hawk3145]

Well I ended up dealing with a Kioti reginal rep and was offered the 5010 for $100 more than the 4510 through Van Paemel. MIE indirectly helped me out with that price.because they stated the "NX4510 were sold" and could / would not trade. I'm not mad at them but Van Paemel is alot closer to house and on the way to/from the cottage where it will kept. So hopefully I wont need any service but if I do I'm not going out of my way for warranty work. I heard all good things about MIE but they were much more expensive in everything including implements. But indirectly I love MIE because I was buying a LS XR until I was offered this deal. I was ready to.buy from MIE until I seen their prices So deposit is made and should take delivery in the next 2 weeks once the new NX5010 arrives from texas. I cant wait!

 

[Kioti Dave]

Well I ended up dealing with a Kioti reginal rep and was offered the 5010 for $100 more than the 4510 through Van Paemel. MIE indirectly helped me out with that price.because they stated the "NX4510 were sold" and could / would not trade. I'm not mad at them but Van Paemel is alot closer to house and on the way to/from the cottage where it will kept. So hopefully I wont need any service but if I do I'm not going out of my way for warranty work. I heard all good things about MIE but they were much more expensive in everything including implements. But indirectly I love MIE because I was buying a LS XR until I was offered this deal. I was ready to.buy from MIE until I seen their prices So deposit is made and should take delivery in the next 2 weeks once the new NX5010 arrives from texas. I cant wait!

Good choice. I have the NX4510 with cab for a year now. Very happy. They had a 5010 on lot, but was 3k more. Wish I had gone with a little more hp. You will be happy with the purchase. I had a blend kit installed on mine on warranty so I could run the A/C in the winter and still have it blow hot air. It would not do that from the factory. Makes a big difference in the winter with fogging windows. I quickly used the 2 remotes, and wished I had a third. Future purchase I guess. Have fun with the new toy.

 

[MichiganIron]

Well I ended up dealing with a Kioti reginal rep and was offered the 5010 for $100 more than the 4510 through Van Paemel. MIE indirectly helped me out with that price.because they stated the "NX4510 were sold" and could / would not trade. I'm not mad at them but Van Paemel is alot closer to house and on the way to/from the cottage where it will kept. So hopefully I wont need any service but if I do I'm not going out of my way for warranty work. I heard all good things about MIE but they were much more expensive in everything including implements. But indirectly I love MIE because I was buying a LS XR until I was offered this deal. I was ready to.buy from MIE until I seen their prices So deposit is made and should take delivery in the next 2 weeks once the new NX5010 arrives from texas. I cant wait!

Looks like everything worked out for the best. Glad we were able to help this get done.

Welcome to the pack !!!!

 

[Threepoint]

Well I ended up dealing with a Kioti reginal rep and was offered the 5010 for $100 more than the 4510 through Van Paemel. MIE indirectly helped me out with that price.because they stated the "NX4510 were sold" and could / would not trade. I'm not mad at them but Van Paemel is alot closer to house and on the way to/from the cottage where it will kept. So hopefully I wont need any service but if I do I'm not going out of my way for warranty work. I heard all good things about MIE but they were much more expensive in everything including implements. But indirectly I love MIE because I was buying a LS XR until I was offered this deal. I was ready to.buy from MIE until I seen their prices So deposit is made and should take delivery in the next 2 weeks once the new NX5010 arrives from texas. I cant wait!

Congratulations on the new tractor! That sounds like a very good deal, and quite unusual. There isn't a lot of profit for the Kioti dealers on new tractors. To succeed in the long term, they have to have a good business model and operate efficiently. Sounds like you hit the perfect storm of circumstances. :thumbsup:
Of course, you may also have spoiled the expectations of future TBN shoppers looking at new NXs. :laughing: I think Kioti Dave's experience on price spread between the NX4510HST cab and NX5010HST cab is more typical!

BTW, regarding the issue of not being able to run the A/C and heat simultaneously, I think that must have been a problem with a particular production run of components of the blend system. My 2014 NX4510HST cab has never had that problem. Yep, you definitely want to run the A/C with the heat.

Keep us posted on how you like your new tractor.

 

[Hawk3145]

I’m sorry, after reading my post I would like to clarify. The 5010 was $1757 more tractor only, than the quote I got for the 4510. Where the difference came in was all the add on’s (dual remotes, 3rd function, rear wiper, loaded tires, hydraulic top link, delivery, grapple and pallet forks). And the total price difference was $136 more for the 5010 “out the door package deal”, than quoted for equally equipped 4510. I sure wish I had it now to move some of this snow out of the way!

 

[thekkfan]

BTW, regarding the issue of not being able to run the A/C and heat simultaneously, I think that must have been a problem with a particular production run of components of the blend system. My 2014 NX4510HST cab has never had that problem. Yep, you definitely want to run the A/C with the heat.

This was an issue on certain 2016 and 2017 NX series cabs. I had my 5510 updated with this fix and all is good now.

 

[Threepoint]

I知 sorry, after reading my post I would like to clarify. The 5010 was $1757 more tractor only, than the quote I got for the 4510. Where the difference came in was all the add on痴 (dual remotes, 3rd function, rear wiper, loaded tires, hydraulic top link, delivery, grapple and pallet forks). And the total price difference was $136 more for the 5010 登ut the door package deal? than quoted for equally equipped 4510. I sure wish I had it now to move some of this snow out of the way!

Thanks for the clarification! Sounds like a nice package.

BTW, with all that money you've saved, and since the tractor's on order, there's still time to add that second No. 2 remote kit, to give you three rear remotes.

Then, when you go to move all that snow next time, you'll be able to add a hydraulic offset cylinder to your rear blade, if it has an offset feature (e.g., a Woods HBL84-2). But most importantly, you won't be forever glancing over at that empty slot for the third remote lever on your right-hand console and muttering: "Wudda, cudda, shudda". :laughing: Your dealer can probably do it for about $200 at the same time he's installing the first two. Just sayin'.