oil from breather vent tube?

   / oil from breather vent tube? #1  

mathey

Platinum Member
Joined
Sep 17, 2002
Messages
643
Location
MD
Tractor
NH TC33D
My CK20 has about 47 hours on it. Yesterday after a full day of mowing (hot day - 95 deg), I noticed a few drips of oil on the garage floor. Closer inspection revealed it came from the breather vent tube attached to the top of the valve cover.

Is this normal or something I should be worried about?
 
   / oil from breather vent tube? #2  
I would not be worried about this as a certain amount of crank case blow by and venting is expected especially as the engine is going through break-in. I would recommend that you change the oil and filter at 50 hours if your owner's manual does not already specify this. If this symptom continues to worsen, then I would have the dealer look at it. Another 50 hours of run time should give an idea as to what is the trend.
 
   / oil from breather vent tube?
  • Thread Starter
#3  
</font><font color="blue" class="small">( I would recommend that you change the oil and filter at 50 )</font>

yes, i'm scheduled to do that this week...
 

Tractor & Equipment Auctions

Skid Steer (A52377)
Skid Steer (A52377)
72in Dual Cylinder Grapple Skid Steer Attachment (A51691)
72in Dual Cylinder...
2011 Ford Crown Victoria Sedan (A51694)
2011 Ford Crown...
2014 Infiniti QX60 (A51694)
2014 Infiniti QX60...
2016 FREIGHTLINER CASCADIA TANDEM AXLE SLEEPER TRUCK (A54313)
2016 FREIGHTLINER...
Pull-Behind 66in Smooth Drum Ballast Roller (A51691)
Pull-Behind 66in...
 
Top