Old Yanmar owner whos looking at a new Yanmar, I have questions?

[holtza]

Rumblon, sounds like we both went to the same Yanmar dealer in Caldwell. I bought mine from Ag equipment southwest off of Simplot Blvd, I looked at New Holland, Mahindra and a couple of the others and decided to buy the yt235. When I tested out the yt235 I was impressed with the power and quick response of the engine, I honestly thought it was turbo'd but my only issue was it's lifting capacity so I took it back to Ag Equipment and they checked it out and found out that the pump was set to the low end of the pressure and after they turned the pump up it is awesome. the only attachments I have is the bucket, forks, boxblade and a three point receiver hitch I made and now am in the process of building a front quick detach snow blade for this winter seeing as I believe we are going to get plenty of snow this year. I live over here in Mountain Home, so not too far away.

 

[RUMBLON]

Rumblon, sounds like we both went to the same Yanmar dealer in Caldwell. I bought mine from Ag equipment southwest off of Simplot Blvd, I looked at New Holland, Mahindra and a couple of the others and decided to buy the yt235. When I tested out the yt235 I was impressed with the power and quick response of the engine, I honestly thought it was turbo'd but my only issue was it's lifting capacity so I took it back to Ag Equipment and they checked it out and found out that the pump was set to the low end of the pressure and after they turned the pump up it is awesome. the only attachments I have is the bucket, forks, boxblade and a three point receiver hitch I made and now am in the process of building a front quick detach snow blade for this winter seeing as I believe we are going to get plenty of snow this year. I live over here in Mountain Home, so not too far away.

holtza, yes, Ag equipment southwest is where I am buying mine from. I decided to go with the 359C as Im on 175 acres. I also bought a Wifo snow blower, quick release forks, rototiller, rotary cutter and I own a nice post hole auger. I had five feet of snow sitting here at one point last year and Im not plowing again with a 40 year old 2210BD Yanmar. I had them ad the the third power take off up front so I can buy and ad a grapple at some point. You must have dealt with Ben? I called around and the prices were pretty set. I could get better financing at a higher price for the tractor but the tractor was $38,500. The tractor is there in Caldwell ad was to be delivered last week but at the last minute I asked about a block heater assuming it was stock like my cummins trucks. IT was NOT, so they ordered one and will install it. I got a large load of gravel yesterday and cant wait for it to get here to break it in.

Did you get the 235 with that cab on it? I see they had one with a cab.

RUMBLON

 

[VeRV77]

Congratulations RUMBLON! You are going to love that machine. You'll have to post some pictures when it arrives, in true Tractorbynet fashion.

 

[RUMBLON]

Congratulations RUMBLON! You are going to love that machine. You'll have to post some pictures when it arrives, in true Tractorbynet fashion.

I will for sure.

 

[RUMBLON]

Congratulations RUMBLON! You are going to love that machine. You'll have to post some pictures when it arrives, in true Tractorbynet fashion.

I will for sure.