Sfisher12345678
New member
Hello! I've got an Oliver 1375. We had to work on the transmission... so, broke the tractor in half (which meant disconnecting hydraulic lines) and now when we reassembled the tractor, the 3 point hitch hydraulic system no longer works. We think we have air or a vacuum in the hydraulic system. We think that our hydraulic pump was working properly before we started working on the transmission...but, we are not 100% sure. Anyhow, just filling the hydraulic reservoir is not working. My question is how do you re-fill and bleed the hydraulic system?
Steve
Big Clifty, KY
Steve
Big Clifty, KY