One little Clean BX22! :)

[Henro]

That looks just like my BX2200...

Of course, I learned to keep a film of dirt on top to protect the finish... /forums/images/graemlins/grin.gif

Still, I know mine looks just like that deep down under the protective dirt cover I keep on it! /forums/images/graemlins/blush.gif

 

[wroughtn_harv]

</font><font color="blue" class="small">( I learned to keep a film of dirt on top to protect the finish...)</font>

Put me in that category. I'd sooner sandpaper a wildcat's butt in a telephone booth than polish.

 

[Bird]

/forums/images/graemlins/laugh.gifIsn't that an indication you're gettin' old, Harv? /forums/images/graemlins/laugh.gif I used to wax and/or polish my vehicles pretty regularly, and best I can remember, the last time was 15 years ago. /forums/images/graemlins/laugh.gif

 

[GerardC]

</font><font color="blue" class="small">( /forums/images/graemlins/laugh.gifIsn't that an indication you're gettin' old, Harv? /forums/images/graemlins/laugh.gif I used to wax and/or polish my vehicles pretty regularly, and best I can remember, the last time was 15 years ago. /forums/images/graemlins/laugh.gif )</font>

Must be we are getting older. Maybe we're just not out there to impress the ladies anymore /forums/images/graemlins/tongue.gif. Gerard

 

[Nasty135]

Yeah nothing like a shiny tractor to get dates??? /forums/images/graemlins/blush.gif /forums/images/graemlins/laugh.gif /forums/images/graemlins/grin.gif

Especially one of those corn-fed babes /forums/images/graemlins/wink.gif

Don't worry he'll grow out of the shiny shine thing, But I did just wax mine about 3 weeks ago /forums/images/graemlins/confused.gif(guilty)Just haven't taken pics,maybe one day when there is time...

 

[Junkman]

You made me feel guilty, so I washed the mower deck today. Now, if you really want to make me feel bad, show us a picture of your mower deck after you have waxed it. Don't forget the picture of the underside, where it really counts. /forums/images/graemlins/grin.gif Do you wax the blades and polish the grease fittings also??? /forums/images/graemlins/crazy.gif /forums/images/graemlins/grin.gif

 

[thcri]

Well actually I did clean up my mower deck this fall. Didn't wax it but I did take the blades off, lifted it up with my FEL and pressure washed it and sprayed Pam on the underside and put in a nice clean storage shed that is heated.

murph

 

[GerardC]

</font><font color="blue" class="small">( ....a nice clean storage shed that is heated.

murph )</font>

How do you heat it? Gerard

 

[Junkman]

I cleaned mine the old fashioned way. Lots of grease cutting soap and a large sponge and a soft bristle brush. Hosed the whole thing down a bunch of times till I was satisfied that it was as clean as I could get it without breaking out the pressure washer. I shy away from using the pressure washer on things with paint. I have seen them peal paint off quicker than a prom dress. I don't use the pressure washer as much as I probably should for some projects, because it seems too powerful. This week, I will disassemble the bearings and clean and grease them. Want to inspect the bearings since I was the first to realize that the dealer didn't fill them with grease. Junk....

 

[GerardC]

</font><font color="blue" class="small">( I have seen them peal paint off quicker than a prom dress. Junk.... )</font>

LOL. Now that's quick /forums/images/graemlins/tongue.gif!

My pressure washer (cheap one for $89.00) was put away last week. Bought it over the summer but found that it was easier to clean with the garden hose and a stiff brush. Gerard