Not to worry, it only gets worse as you grow older.
A while back after being out for an hour or 2, I have one black shoe & 1 brown shoe on. one is a high top & other a low.
Balance also goes to he77. Almost fell over a day or 2 ago. Needed to grab something. Grab an octiila. Not the right thing to grab. sharp thorns 1 to 2 inches long. Naturally it starts to bleed. My day is hardly ever complete until i do something stupid or painful.
A while back using a brad mailer, holding a board with 1 hand & shooting brads in from other side. Yep right into a joint in my finger.
Wanted to poke a hole in barn to run an extension cord through. naturally I had to hit my knuckle & thumb joint.
I can loose a tool while using it. If i lay it down & turn around, it must have moved its self.
Cause its now in hiding.
Have several projects where I need to climb a ladder. Use both hands, look at where feet are. Move tool, & go up 1 step, then do it all again.
need to clean out crock pot for some ribs that I killed. Fill with soapy water. Forget it & leave it on high. Now worse than when I started.
Turning simple projects in to a real pain.
Have 3 routers, 1 is so wimpy, even on a light cut it stalls out. 1 Lost its ability to be adjusted up or down No problem I have another 1 that needs a new plug. That goes real well. Use to have a real good aluminum table, its gone, now have cheap plastic, it is crummy & way too light. Finally get a screw started, it will not go in, wrong threads?? 1/2 Hour, find tap, it cuts nothing, but screw go in. The routher is not a cheap O, Porter Cable. It adjusts up & down. Small problem, loosen hold in place screw. But its just a guess shove it up a little, look ooopps up to far, let it down a little, ooopps too much. In a little over an hour I have it set. Equal depth both ways. 1 more small problem. Cutting way to much, it keeps kicking board out.
When younger I could put a 50# sack of dog food under each arm & walk a 100 yards or more. Now its a problem just picking 1 up.
Having problems with hoses, no problem I have lots of them. Find 1 not too stiff, or kinked up. Lets use it, nice female coupling on the end, Use other end. another female coupling on other end as well. When, how & why did I do that. Must have been someone else.:laughing:
Its time for a beer, relax and let frustration ease up. 1 Beer will not do it, time for number 2 & 3. :thumbsup::thumbsup::thumbsup:
No more projects, enjoy ghe beer & think about what the he77 has become of me. Almost instantly, was in great shape about 5 years ago. Now 77, doubt that anything will get better.
Beer makers are starting to love me.
