ruffdog
Super Star Member
- Joined
- Dec 31, 2011
- Messages
- 12,451
- Location
- southern wisconsin
- Tractor
- Bobcat Toolcat 5610G, Deere X744, Cub Cadet IH 982
Could one of these scissor 3-point attachments be used with forks?
pallet forks for FEL
- Thread starter finnercy
- Start date
- Views: 4482
4570Man
Super Star Member
- Joined
- Apr 7, 2015
- Messages
- 18,931
- Location
- Crossville, TN
- Tractor
- Kubota M59, Kubota L3800, Grasshopper 428D, Topkick dump truck, 3500 dump truck, 10 ton trailer, more lighter trailers.
That looks like a 3x or so mechanical disadvantage. I doubt it would be any stronger than the loader.
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 13,282
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
Yes, depending on the weight of what the forks are lifting. It would also need a hydraulic top link where the top link is in the pictures:
Foodplot
Silver Member
Like Diggin it, I've used my 3pt pallet fork with my loader. Set it in the bucket, use two sections of chain and a load binder to strap it to the bucket, one chain on each side looped around a fork and an upright, and behind the bucket. Works fine, takes just a couple of minutes and it's cheap. I since fabricated a set of real forks to swap with the bucket.