Pallet forks on your FEL

[kennyd]

Yes, 1 1/4" solid.

 

[bobbyjak]

Thought so..Thanks again..

 

[JB4310]

Justin, sorry for the late reply, but I have the horst welding 3000 lb. forged tine model with my 4310, 300 cx. which came from JD dealer, I like them better than the JD model because they have a higher back which helps prevent loads from spilling over the back. They were a little pricey around $900.00 but are very heavy duty and great for moving all kinds of bulky loads like logs etc. came in handy lifting tripled up 16 ft. 2x12's when building a shed (for the tractor). be very careful when lifting capacity loads off a high truck, as you lower the loader the weight moves forward exceeding capacity then if the load is not perfectly centered it tends to want to throw the tractor on its side, not just lift the back wheels of the ground, (almost happened to me). always use max. ballast and be ready to drop your loader fast if you get in trouble with raised load, it will usually help, good luck.
John,

 

[ddivinia]

Does anybody have pics? I would like to see my options in the pallet fork realm. I am looking to put them on my 4720.

Thanks,
D.

 

[JB4310]

D.
I'll try to post pictures of my Horst welding forks, have not figured out how to post good pictures.
John,

 

[JB4310]

Well that came out O.K., here is another picture

 

[ddivinia]

Wow, those do look heavy duty. The more I look at the pictures, the more applications I can think of for them...

Thanks,
D.

 

[jhortonvt]

That looks great JB!
You wouldn't want to rent that to me for about 6 months would you? /forums/images/graemlins/grin.gif

 

[JB4310]

you can check out the horst site at www.horstwelding.com , do get the forged forks, they are solid steel but thin enough to get under tight spaces. web page horst weldind

John

 

[ddivinia]

I love my FEL. I am going to order a fork setup for my 4720 with 400X. Thanks for the pics.

D.