soarkrebel
Gold Member
Heck i had to wait almost two weeks for a tie rod dust boot for a 02 kubota. who knows?
Parts availability
- Thread starter twhman
- Start date
- Views: 2216
Anonymous Poster
Epic Contributor
- Joined
- Sep 27, 2005
- Messages
- 29,678
Kubota seems to have some difficulties since they started assembling their tractors in Atlanta. They don't seem to have the quality or support they used to have. I hope they get their act back together again. They are the number 1 seller of compact tractors in the US, but may not long hold that position if they continue their current practices.
just my opinion
just my opinion
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
<font color=blue>Heck i had to wait almost two weeks for a tie rod dust boot for a 02 kubota. who knows?
<font color=black>Yikes... I ordered my tie rod dust boots from the internet, and had them in 3 days... and found out I could have used some from napa on the shelf if I had mic'd the little spindle shaft and found a matching size.
Sorry for your slow luck on parts. Good luck otherwise.
Soundguy
<font color=black>Yikes... I ordered my tie rod dust boots from the internet, and had them in 3 days... and found out I could have used some from napa on the shelf if I had mic'd the little spindle shaft and found a matching size.
Sorry for your slow luck on parts. Good luck otherwise.
Soundguy
