Citydude
Super Member
Glad to be of assistance! Take care.
Pat's Easy Change Pat's Easy Change System - Order Online!
- Thread starter Muhammad
- Start date
- Views: 310350
Glad to be of assistance! Take care.
KevT
Platinum Member
- Joined
- Apr 1, 2015
- Messages
- 996
- Tractor
- Kubota L3901 HST w/ FEL, ST2046
I bought the Pats at ASI and it came complete with spacer bar. Now it is so easy to change attachments on my own, they are wonderful
KevT
Platinum Member
- Joined
- Apr 1, 2015
- Messages
- 996
- Tractor
- Kubota L3901 HST w/ FEL, ST2046
wrflt
Silver Member
Ok, I'm back. It's been a while since I installed the Pat's Easy Change but I only recently used my rotary cutter with it. I'm really liking the system as it does make changing implements much easier. Here's the deal tho; with the rotary cutter it seems the pto shaft on the cutter may be about to come loose. Where can I find an extension for the drive shaft and what would it be called. My thanks in advance.
KevT
Platinum Member
- Joined
- Apr 1, 2015
- Messages
- 996
- Tractor
- Kubota L3901 HST w/ FEL, ST2046
I had the same issue so this is what I just ordered. Pto Adapter The pic is wrong, but description is right. Haven't got it yet, will let you know when I do
gwdixon
Elite Member
Actually, I think the photo is correct. I own two of them. They work perfectly and make up for the longer PTO requirement that the Pat's causes.
KevT
Platinum Member
- Joined
- Apr 1, 2015
- Messages
- 996
- Tractor
- Kubota L3901 HST w/ FEL, ST2046
You have a better pic than I do because when I bring it up it shows a six spline to a 21 spline, but describes a 6 x 6
gwstang
Platinum Member
If you have a TSC (tractorsupplycompany) near you, they have the extensions that work.
wrflt
Silver Member
Yeah, thanks guys. The pic shown (6x21) is the same as the one I found at TSC, which won't work for me. I do need the 6 to 6. TSC didn't have that one. Now that I know there is such an animal I will ask them to order me one. Thanks again.
