Pick Up Truck Headache Rack
- Thread starter GeneD14
- Start date
- Views: 14126
OP
GeneD14
Veteran Member
- Joined
- Jul 29, 2003
- Messages
- 1,458
- Location
- Tennessee
- Tractor
- Kubota B26 TLB, Allis Chalmers D17 series IV, Kubota ZG-23 Mower, Kubota ZD 1211, Kawasaki Mule 610, Stihl 361, Stihl 045 AV Super, and a Stihl 660 Ported and tuned
The total cost for all of the steel and the paint was less than $100. It took about 6 hours to fabricate it and 2 hours for primer and paint. It was fun, but I am so glad to be done cutting and grinding. I do the cutting with an abraisive cut off saw and it is loud and sprays little sinders and sparks everywhere. The welding with my MIG machine is actually the fun part. /forums/images/graemlins/grin.gif
Piedmont3
Silver Member
Nice Job ! /forums/images/graemlins/grin.gif
It looks Great !
It looks Great !
George2615
Super Member
I recently did a similar rack. I wanted a rack to haul ladders, mount my plow light, and antenna's so I didn't have to mount or drill holes in the truck roof. Store bought similar units were $450. and up so I decided to build my own. I bought 2 - 20' lengths of 1 1/2" x 2 1/2" heavy gage tubing for about $150. and built the attached to fit into the stake pockets. I should have took pics as I built it but wasn't thinking of posting it here. Mine took 2 evenings, and part of Sat. & Sun. to prime and paint. Total of about 12 hours. By the way, nice touch on the horseshoes.
George
George
Attachments
OP
GeneD14
Veteran Member
- Joined
- Jul 29, 2003
- Messages
- 1,458
- Location
- Tennessee
- Tractor
- Kubota B26 TLB, Allis Chalmers D17 series IV, Kubota ZG-23 Mower, Kubota ZD 1211, Kawasaki Mule 610, Stihl 361, Stihl 045 AV Super, and a Stihl 660 Ported and tuned
George,
You did a nice job! I like how the color matches you truck's paint.
You did a nice job! I like how the color matches you truck's paint.
Highridge
Gold Member
- Joined
- Feb 12, 2005
- Messages
- 331
- Location
- Southeast, MA
- Tractor
- Power-Trac 1430 and Craftsman DGT6000
Great Job!
It looks great on that King Ranch Ford /forums/images/graemlins/cool.gif
It looks great on that King Ranch Ford /forums/images/graemlins/cool.gif
OP
GeneD14
Veteran Member
- Joined
- Jul 29, 2003
- Messages
- 1,458
- Location
- Tennessee
- Tractor
- Kubota B26 TLB, Allis Chalmers D17 series IV, Kubota ZG-23 Mower, Kubota ZD 1211, Kawasaki Mule 610, Stihl 361, Stihl 045 AV Super, and a Stihl 660 Ported and tuned
Thanks for the nice comments. One of my friends asked me to make one for him. I really don't have the patience to do another one, at least until next winter. /forums/images/graemlins/smirk.gif
Egon
Epic Contributor
That was a nice job you did on the headache rack.
I've seen many built from pipe and weldelets which reduces the angled fitting time. Also many grill quards built this way.
Egon
I've seen many built from pipe and weldelets which reduces the angled fitting time. Also many grill quards built this way.
Egon
