Snow Equipment Owning/Operating Pictures of your snow weapons

[Soldier415]

My blower is currently at a fabricator shop. Having 3" wings added to each side to increase my width out from the edge of the rear tires

 

[joeyd]

That may be my next "addition". My front tires dig into the bank depending on the direction the road takes because the blower on the rear is close to the width of my rear tires. It's fine on the straights.

 

[Soldier415]

That may be my next "addition". My front tires dig into the bank depending on the direction the road takes because the blower on the rear is close to the width of my rear tires. It's fine on the straights.

Blower is 68" wide, tires are at 66" width. Problem is my driveway has drop offs on the sides. 2 inches is a little too close for comfort.

 

[FatTire]

Blower is 68" wide, tires are at 66" width. Problem is my driveway has drop offs on the sides. 2 inches is a little too close for comfort.

That's a nice driveway. Is that a steel bridge? Or wood?

 

[Soldier415]

That's a nice driveway. Is that a steel bridge? Or wood?

Wooden deck and rails. Built across 4 steel I beams of the same size used in freeway overpasses. Prepared reinforced concrete abutments

 

[Dave M7040]

Blower is 68" wide, tires are at 66" width. Problem is my driveway has drop offs on the sides. 2 inches is a little too close for comfort.


No reason why you could not add "wings" to your blower to artificially make it wider.

Dave M7040

 

[Soldier415]

Blower is 68" wide, tires are at 66" width. Problem is my driveway has drop offs on the sides. 2 inches is a little too close for comfort.


No reason why you could not add "wings" to your blower to artificially make it wider.

Dave M7040

Scroll up. Its at the fabricator's shop having 3" wings added to each side

 

[beenthere]

Have posted this before, but this "wing" will get the snow off the road and into the ditch..

 

[powerscol]

Have posted this before, but this "wing" will get the snow off the road and into the ditch..

Did you make that or is there a place to buy it?

 

[beenthere]

Powerscol
Own design and had it fabricated. Will hang off the left or right FEL mounting stub, and pins to the drawbar with telescoping push arm, then is lifted using a chain around the 3 ph arm. Quick on and off, and works like a dream..

A google search for "wing plow beenthere" and some of the build in progress can be viewed.

For starters
http://www.tractorbynet.com/forums/john-deere-owning-operating/159770-wing-plow.html