Snow Equipment Owning/Operating Pictures of your snow weapons

[srs]

Updated pics. 8 foot Fisher mounted to SSQA plate on front, using 3rd function on front for turning. The Pronovost blower was brought over from the L3200 and widened from 64 to 80" with a pair of wings.

Hey Chim, where did you get the LED lights for the rear of the tractor? Any info would be appreciated. Thanks, Stanley

 

[Fallon]

Hey Chim, where did you get the LED lights for the rear of the tractor? Any info would be appreciated. Thanks, Stanley

I'm not Chim, but... https://www.tractorbynet.com/forums/customization/376458-let-there-light-l4060-light.html

The OEM solution for Kubota 60 series grands is a switch & 2 halogen lights for $150 or so. All the wiring is in place already. I went crazy with overkill wiring on mine, but OEM wiring is fine for light cubes or small bars.

LED cubes & small or big bars are all over Amazon. Just search for "led light tractor" & you'll find a ton. My 42-52" bars were only $50-60 or so each & you can get 4 cubes for that these days. Cheap ones (like my bars) have cheap power supplies & cause a lot of RF noise, killing the radio.

 

[chim]

Maxxima MWL-42 from The Trailer Shoppe near EPHRATA PA. A little over $40 each. They do internet sales and walk in.

 

[shaeff]

I’ve had great luck with my Kawell 42w units. I’ve got two of their round 42w facing forward and two of their 27w facing rear. It’s a lot of light, but not as much as a light bar.

I wired mine so that when I flip my switch up, just the fronts come on. Flip the switch down and the front AND rear lights come on. (Helpful in summer with bugs).

You can see the rears here. Fronts are the same but a touch bigger. Pic taken right after I purchased the blower and serviced it.

Total was $53 shipped to my door. Already had wire and relays on hand. I kept my wattage draw low because my machine is old and has a generator that doesn’t put out too much haha

 

[Tony H]

Haven't played with any MF engines but in the small block chevy days.. We used a Sneaky Pete to run the Rope seals over the crank. Wonder if it will work for you.

https://www.amazon.com/Lisle-27000-...ocphy=9004707&hvtargid=pla-556414594558&psc=1

 

[Bob88]

Here is mine John Deere 850 with 666 blower and 7ft model 45 blade wish I had a cab haha.

 

[Thomas]

mpham
Finally got a pic of the set up I made for the 7 ft. Fisher plow.
I didn’t have time to clean it up and paint it before the cold came. I will scrape and paint next summer.
..........................
Nice :thumbsup: and your snow removal time got less now.

 

[swampy6]

I know exactly what you mean on the ice. Some folks scrape down to bare pavement and some (like us) scrape down to bare ice.:laughing:View attachment 589636 That's what an inch and a half or rain did to my nice smooth snow pack. And boy was that slick under Tuesday night's snow!.

Did you take the boss skating?

 

[pmsmechanic]

Haven't played with any MF engines but in the small block chevy days.. We used a Sneaky Pete to run the Rope seals over the crank. Wonder if it will work for you.

https://www.amazon.com/Lisle-27000-...ocphy=9004707&hvtargid=pla-556414594558&psc=1

Thank you. I had thought of including that in my remarks but didn't remember the name "Sneaky Pete".

 

[shaeff]

Haven't played with any MF engines but in the small block chevy days.. We used a Sneaky Pete to run the Rope seals over the crank. Wonder if it will work for you.

https://www.amazon.com/Lisle-27000-...ocphy=9004707&hvtargid=pla-556414594558&psc=1

Looks interesting, I’ll see if it’s something that could work for this application. Thanks!