pictures

[WestshoreConstruction]

Treeman what tires do you have on the Tigercat ? I'm putting the 77x44's on mine and want to see how much the tires are gonna stick out past the head. I have the FAE 500u on mine so it's 10' overall width.

 

[MacLawn]

:thumbsup:Man, and y'all boys get paid to play with this stuff in the swamps and woods all day??! Just a'jestin', I know you have a lot of skill, not to mention the huge investment! Anyway, I would love to just come and watch this kind of work! At least I can watch it here... Thanks guys! I'm just a city slicker, hang out here on TBN, and love to read these post about land clearing! Keep up the good work - grinding up all that mess that is trying to overtake us!

Canadian friend, "Nature, nature? Stand still long enough, and it'll try to kill you!"

 

[fishfactor]

If we're posting videos, here is one of me... setting the world record for the fastest 1/4 acre ever mulched!

YouTube - SP_Enviromentally_Friendly_09.mov

 

[treeman40]

there 44s. right at 10 feet

 

[WestshoreConstruction]

So they don't stick out past the head ?

 

[treeman40]

no they are even with the head.i need to measure to be sure of the 10 ft.

 

[DIRTROAD]

Here's some more videos for your enjoyment.

YouTube - CAROLINACLEARING's Channel

 

[DIRTROAD]

If we're posting videos, here is one of me... setting the world record for the fastest 1/4 acre ever mulched!

YouTube - SP_Enviromentally_Friendly_09.mov

I like it!! Very well presented and lay out.

 

[treeman40]

westshore i was incorrect on width its 11.5 .you also need to talk to tigercat about wheels the 44s rub if the spacing not right

 

[WestshoreConstruction]

westshore i was incorrect on width its 11.5 .you also need to talk to tigercat about wheels the 44s rub if the spacing not right

I bought the tires and rims used with chains from a 630 skidder, I'm expecting there to be some issues I can get the offset changed if need be. Thanks

 

[WestshoreConstruction]

westshore i was incorrect on width its 11.5 .you also need to talk to tigercat about wheels the 44s rub if the spacing not right

I bought the tires and rims used with chains from a 630 skidder, I'm expecting there to be some issues I can get the offset changed if need be. $16500 with chains not a bad deal huh. Fronts are 90% rears are 60-70 % Goodyears

 

[treeman40]

thats a deal ,how are the tracks wearing

 

[WestshoreConstruction]

thats a deal ,how are the tracks wearing

Tracks are fine the only problem with them is if you do sink they don't like to climb out of the hole the kinda keep going down. But on ground that is a little soft they are great almost no tracks at all

 

[ddigger]

Here are a few work picks from some of my clearing jobs.

Same spot as above

To steep to walk!

I have a ton more but dont want to bore anybody.

 

[SSP&M]

moving to a new job. this was a load!!

 

[ddigger]

Nice looking web site SSP&M.

 

[SSP&M]

Thanks for the compliment!! i need to update some more before after pics and get a pic of our sk120 with cimaf head on it.


on a side note: the picture of the barko and takeuchi loaded on trailer didnt work....i was overweight for 2 pieces of equipment.

 

[fishfactor]

Is the barko that heavy?

 

[SSP&M]

Truck trailer and load was 99820lbs. we were figuring on barko at 40000 and takeuchi at 12000. We dont do much hauling so we werent sure about permits and restrictions. It seems that you cant haul 2 pieces of equipment when the combined total gcvw is over 85000lbs i think. anyway it comes out that the barko weighs around 45000lbs.


justin

 

[fishfactor]

We are in the trucking business, then the mulching business. That would be a big ticket depending on which state. We have our trucks tagged for 80,000 lbs and can haul about 45,000 after allowing for the truck/trailer.

Hope you didn't get a ticket and instead went to weigh the load first.

On a side note, I had our web address in my signature and got a email from a mod. Wonder how others get away with it?