Piranha bar or tooth bar

Big Chief · Dec 23, 2018

I am trying to decide which one a piranha bar or Titan tooth bar. I will weld the Titan setup my self. Just not sure which one. The piranha looks small and the Titan teeth look BIG, but I like big....and I work my stuff hard

I have seen all the posts on the piranha who has a tooth bar?

Going on a Mahindra Emax 50inch bucket.

Oldoak · Dec 23, 2018

I have a tooth bar from Construction Attachments XTreme Duty Bolt on Tooth Bar for Tractor Loader and Skid Steer Loader Buckets

I don't thing anything beats a tooth bar for pure digging. While I think the "piranha" would be would be OK for digging, it would also be great for brush grubbing.

747driver · Dec 23, 2018

I have the Piranha bar. Works really well for my application. It will dig but it helps if the ground is not real dry. Plus I am able to back drag with it and still get a smooth run. Since we live in a National Forest it is great for keeping the underbrush clear. It will also take out small saplings with the way the teeth and designed. Just remember that FEL are not made for abuse when digging ! To easy to twist the frame or damage a cylinder.

Big Chief · Dec 31, 2018

So I decided on the titan tooth bar so I can use my pallet forks and bucket forks for my plow.
I will be welding it up tomorrow. Here are a few pics of the mock up.

Big Chief · Dec 31, 2018

Atchuuu · Dec 31, 2018

Looking good. Those are some serious teeth.

fried1765 · Dec 31, 2018

Big Chief said:
So I decided on the titan tooth bar so I can use my pallet forks and bucket forks for my plow.
I will be welding it up tomorrow. Here are a few pics of the mock up.

I bought 8 Titan teeth, and then a piece of 1/2" x 3" flat stock.
I made my bar so that with shims, I can use it with either of my buckets.
Easy to swap, and works great.