cfield
New member
i havent used a plow a whole lot. today, i was plowing- with double bottom 14 in plow. all of a sudden, the angle piece of steel is almost bent in half. any suggestions on how this may happen so i can avoid the hassle again? thanks
plow
- Thread starter cfield
- Start date
- Views: 1002
idaho2
Gold Member
- Joined
- Aug 11, 2009
- Messages
- 433
- Location
- SW WA / North Idaho
- Tractor
- Mahindra 5530 4WD Turbo - Gear,
Need pics of item in question.
idaho2
idaho2
oldnslo
Super Member
Did something bend or is this trip beam plow at the bottom tripped. Like Idaho2 said pictures would help.
i will post pics tomorrow. the beam that is connected just behind the hitch connection now looks like a v. this bend now does not allow the plow to sit flush unless i adjust the hitch and im not sure if it will extend that far
i also wonder if it messed up anything on the tractor also. no breaks that i can see. i used the boom pole and hauled a huge tree after the happenings. nothing that i can detect but is there anything i should look for?
i also wonder if it messed up anything on the tractor also. no breaks that i can see. i used the boom pole and hauled a huge tree after the happenings. nothing that i can detect but is there anything i should look for?
