"Portable" Arena
- Thread starter DaveNay
- Start date
- Views: 4477
OP
DaveNay
Platinum Member
- Joined
- Aug 13, 2003
- Messages
- 834
- Location
- Waterman, DeKalb County, Illinois
- Tractor
- John Deere 855 MFWD; Oliver 1850 Gas
Re: \"Portable\" Arena
</font><font color="blue" class="small">( What did you bend them with? )</font>
Well...that is interesting. I was looking for a method to bend them, and found a "rebar bender" at Home Depot, but it was $40 /forums/images/graemlins/shocked.gif
I instead made on myself from 1/2" black pipe. It is basically a 36" handle, then a tee, then (off each end of the tee) a nipple, 90 elbow, nipple and cap. Think of it as a two pronged fork, but with the forks at 90 deg to the handle. You then place the re-bar between the forks, and slide another piece of black pipe over the length of the re-bar. You now have two rigid levers, and can bend the rebar 180 degrees by hand.
I can take some pictures this afternoon fo the bending tool, and how it works.
Dave
</font><font color="blue" class="small">( What did you bend them with? )</font>
Well...that is interesting. I was looking for a method to bend them, and found a "rebar bender" at Home Depot, but it was $40 /forums/images/graemlins/shocked.gif
I instead made on myself from 1/2" black pipe. It is basically a 36" handle, then a tee, then (off each end of the tee) a nipple, 90 elbow, nipple and cap. Think of it as a two pronged fork, but with the forks at 90 deg to the handle. You then place the re-bar between the forks, and slide another piece of black pipe over the length of the re-bar. You now have two rigid levers, and can bend the rebar 180 degrees by hand.
I can take some pictures this afternoon fo the bending tool, and how it works.
Dave
GeneD14
Veteran Member
- Joined
- Jul 29, 2003
- Messages
- 1,458
- Location
- Tennessee
- Tractor
- Kubota B26 TLB, Allis Chalmers D17 series IV, Kubota ZG-23 Mower, Kubota ZD 1211, Kawasaki Mule 610, Stihl 361, Stihl 045 AV Super, and a Stihl 660 Ported and tuned
Re: \"Portable\" Arena
Dave,
I like your ingenuity. The arena looks sharp. It makes me want to go build an arena. But then I'd need to go buy the horses to go with it. /forums/images/graemlins/grin.gif
Nice job!
Dave,
I like your ingenuity. The arena looks sharp. It makes me want to go build an arena. But then I'd need to go buy the horses to go with it. /forums/images/graemlins/grin.gif
Nice job!
OP
DaveNay
Platinum Member
- Joined
- Aug 13, 2003
- Messages
- 834
- Location
- Waterman, DeKalb County, Illinois
- Tractor
- John Deere 855 MFWD; Oliver 1850 Gas
OP
DaveNay
Platinum Member
- Joined
- Aug 13, 2003
- Messages
- 834
- Location
- Waterman, DeKalb County, Illinois
- Tractor
- John Deere 855 MFWD; Oliver 1850 Gas
OP
DaveNay
Platinum Member
- Joined
- Aug 13, 2003
- Messages
- 834
- Location
- Waterman, DeKalb County, Illinois
- Tractor
- John Deere 855 MFWD; Oliver 1850 Gas
OP
DaveNay
Platinum Member
- Joined
- Aug 13, 2003
- Messages
- 834
- Location
- Waterman, DeKalb County, Illinois
- Tractor
- John Deere 855 MFWD; Oliver 1850 Gas
Henro
Elite Member
- Joined
- Jul 4, 2003
- Messages
- 4,982
- Location
- Few miles north of Pgh, PA
- Tractor
- Kubota B2910, BX2200, KX41-2V mini EX
Re: \"Portable\" Arena
Dave,
I could have used something like that this week. I thought about using my half-inch EMT conduit bender but decided I would damage it, and ended up using some pieces of wood that were held in a vise, which was kind of a pain...your set up would have been so much easier!
Thanks for posting the pictures! /forums/images/graemlins/cool.gif
Dave,
I could have used something like that this week. I thought about using my half-inch EMT conduit bender but decided I would damage it, and ended up using some pieces of wood that were held in a vise, which was kind of a pain...your set up would have been so much easier!
Thanks for posting the pictures! /forums/images/graemlins/cool.gif
Kevin_in_VA
Silver Member
Re: \"Portable\" Arena
Nice idea. I suppose I could do the same thing by clamping two pieces of pipe in my vise " a la Henro" and use a long piece for the fulcrum.
Thanks again
Kevin
Nice idea. I suppose I could do the same thing by clamping two pieces of pipe in my vise " a la Henro" and use a long piece for the fulcrum.
Thanks again
Kevin
