laen64
Gold Member
- Joined
- Mar 1, 2009
- Messages
- 477
- Location
- Ashford Alabama
- Tractor
- Bobcat CT335 SST;FERRIS IS 1500Z 25hp 52"
Hey mark
show pics of your setup
Thanks
L.N
show pics of your setup
Thanks
L.N
Post Hole Digger storage
- Thread starter RunninOnEmpty
- Start date
- Views: 16922
NHmitch
Platinum Member
Thanks for the idea!
I made a similar stand, but I made the base a bit wider, and longer,a nd I hung the PHD from a chain with a hook from my top 4x4 cross beam to the hole on the top of the PHD shaft. I sed the same side support idea, and It works great. Thanks again for the design. I have the same model PHD as you, and it is actually, a very heavy unit. This stand makes life so much easier.
I made a similar stand, but I made the base a bit wider, and longer,a nd I hung the PHD from a chain with a hook from my top 4x4 cross beam to the hole on the top of the PHD shaft. I sed the same side support idea, and It works great. Thanks again for the design. I have the same model PHD as you, and it is actually, a very heavy unit. This stand makes life so much easier.
