post your pictures of your boom pole

   / post your pictures of your boom pole #11  
Is that a homebuilt, home modified, or bought it that way? I like some of the options it gives.
 
   / post your pictures of your boom pole #12  
Here's mine. Homemade, lifting a 600lb bush hog.

Mark
 

Attachments

  • 610631-Aboom2.jpg
    610631-Aboom2.jpg
    45.4 KB · Views: 1,118
   / post your pictures of your boom pole #13  
Here's mine, The pole goes into two 2" receiver sockets on my reciever hitch. Usually I have the hitch on with a ball on it. I pasted one picture of just the hitch into one of the hitch plus boom.
 

Attachments

  • 610711-myboom.jpg
    610711-myboom.jpg
    77.1 KB · Views: 1,101
   / post your pictures of your boom pole #14  
Lots of good ideas. Anybody mind if I steal some of them? I will anyway ya know! /forums/images/graemlins/smirk.gif
As always, Ron has the best picture show. /forums/images/graemlins/tongue.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif
 
   / post your pictures of your boom pole #15  
thats what mine is going to look like when i get around to building it.
 

Attachments

  • 610784-dk45rearhitch.jpg
    610784-dk45rearhitch.jpg
    69.6 KB · Views: 1,064
   / post your pictures of your boom pole #16  
Sorry...............mine is store bought.


Tbar
 

Attachments

  • 610792-151789861aSqpez_ph.jpg
    610792-151789861aSqpez_ph.jpg
    87.5 KB · Views: 1,027
   / post your pictures of your boom pole #17  
GuglioLS is that store bought or did you make it.. It really looks like something I need.. /forums/images/graemlins/grin.gif
 
   / post your pictures of your boom pole #18  
Here's a picture of the one I threw together to get this welder out of the back of the van. It pins to the heavy angles on the back of the bucket that the cylinder go to (put them there when I built it). There's a plate to spread the load to the top tube of the bucket.

Have since added a tension brace on top because it was flexing a bit more than I liked. Also need to plate the ends of the square tube on the bucket. It bent a bit transferring the loads.

BTW, the welder weighs something like 650# if I recall. Mounted to an AC D14.

FWIW. A.
 

Attachments

  • 611217-Q&D Pole.jpg
    611217-Q&D Pole.jpg
    46.7 KB · Views: 1,019
   / post your pictures of your boom pole #19  
</font><font color="blue" class="small">( Sorry...............mine is store bought )</font>
I love your son's hat. It looks so cool on the IH red and white. You guys been doing trees lately?
Mines store bought too, but it sure works well. John
 
   / post your pictures of your boom pole #20  
</font><font color="blueclass=small">( GuglioLS is that store bought or did you make it.. It really looks like something I need.. /forums/images/graemlins/grin.gif )</font>

It's Home made

Pre assembly & Pre paint Pics attached to prove it!
 

Attachments

  • 612515-Boom Pole test fit.JPG
    612515-Boom Pole test fit.JPG
    69.1 KB · Views: 894

Tractor & Equipment Auctions

Lull Highlander 1044C-54 Series II 10,000LB 4x4 Rough Terrain Telehandler (A50322)
Lull Highlander...
2016 JLG 3248RS 32FT Electric Scissor Lift (A50322)
2016 JLG 3248RS...
2015 FREIGHTLINER CASCADIA DAYCAB (A52472)
2015 FREIGHTLINER...
2022 Adams CLC-1013 Conveyor - New (A52748)
2022 Adams...
3pt. Bush Hog Mower - RD TH72 Finish Mower (A50514)
3pt. Bush Hog...
(4) Texas Built 25' Stand Alone Panels (A50515)
(4) Texas Built...
 
Top