heehaw
Veteran Member
- Joined
- Sep 15, 2000
- Messages
- 2,076
- Location
- russellville, arkansas
- Tractor
- Kubota M4900, B7510 and RTV
my well is 500 ft from the house, i ran #10-2wg direct burial wire, two runs of it, one for the 220volt submersible pump and one for the 110 volt pump that pumps the water out of the sand filter and to the house, this also handles the light, when the 110 volt pump kicks on, the light goes out, but it comes right back on as soon as the initial start current is over..this has worked flawlessly since 1986. i don't know how much the direct burial wire is now, but i would probably use regular wire an put it in pvc or black plastic, if i were doing it now. the separate meter may be the easiest and cheapest way to go, but what will the minimum monthly bill be 5-10 years from now??
heehaw
heehaw