Powershift grinding (always engaged?)

   / Powershift grinding (always engaged?) #11  
Nazrat.....Pictures would really help to confirm if you have Powershift or not
 
   / Powershift grinding (always engaged?)
  • Thread Starter
#12  
Sure, what would you like pictures of? Here is the shifter/sticker:
IMG_6243.JPG


Here is the front of the transmission:
2012-06-29+13_50_57.jpg


Here is the back of the transmission:
IMG_6242.JPG


And here is the whole unit:
IMG_6236.JPG


-Tad
 
   / Powershift grinding (always engaged?) #13  
I am not familair with your model but I have read that is very simialir to the GT-14 which there are a few members who have them. I don't think that is a powershift though with just Forward, Nuetral and Reverse...but if you search on GT-14 I am sure you will find some owners who you can PM.
 
   / Powershift grinding (always engaged?) #14  
DSC_0740.jpgit should have on the column, N-R which is down and 2 forward, 1 is the first notch and second is all the way forward. then you have 3 ranges I,II and III down to your right. that gives 3 reverse and 6 forward gears.mine also has powershft stickers on it.
 
   / Powershift grinding (always engaged?) #15  
i did find something on a sliding mechanical trans in the manual, maybe it has that being the 1 cylinder?
 
Last edited:
   / Powershift grinding (always engaged?)
  • Thread Starter
#16  
On the column shift it does have 2-1-N-R, but according to the parts manual both the Powershift and the gear-shift have the same shift pattern up there.

I found three things of note in the parts manual:
1) The YM14 shows POWERSHIFT stickers and the YM12 does not.
2) The Powershift transmission has a plug on the right side case near the back on the top. Appears to angle back about 45*
3) The Powershift transmission has a shift cable, and the gear-shift transmission has a solid shift linkage.

I know I don't have the Powershift stickers, but tomorrow when I have time I'll look for the plug as well as look at the shift linkage.

Thanks again for the help.

-Tad
 
   / Powershift grinding (always engaged?) #17  
On the column shift it does have 2-1-N-R, but according to the parts manual both the Powershift and the gear-shift have the same shift pattern up there.

I found three things of note in the parts manual:
1) The YM14 shows POWERSHIFT stickers and the YM12 does not.
2) The Powershift transmission has a plug on the right side case near the back on the top. Appears to angle back about 45*
3) The Powershift transmission has a shift cable, and the gear-shift transmission has a solid shift linkage.

I know I don't have the Powershift stickers, but tomorrow when I have time I'll look for the plug as well as look at the shift linkage.

Thanks again for the help.

-Tad

1) True
2) thats the trans filler plug
3)if thats the case it must have that sliding mechanical trans they talk about, i dont think the GT14 has that? i am sure they are powershift being the 2 cylinder.

Yanny Man has a few of them, but i havent seen him on here in a while.
 
   / Powershift grinding (always engaged?)
  • Thread Starter
#18  
I'm satisfied that this isn't a powershift. It has a mechanical linkage and it doesn't have the fill plug on the top corner of the transmission case.

Thanks all for the help.

-Tad
 

Tractor & Equipment Auctions

Garbage Truck (A51692)
Garbage Truck (A51692)
80in HD Tooth Bucket with Side Cutters ONE PER LOT (A52748)
80in HD Tooth...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2002 Freightliner FL70 Elgin Street Sweeper Truck (A51692)
2002 Freightliner...
1999 WABASH 48X102 FLATBED TRAILER (A52472)
1999 WABASH 48X102...
NEW Wolverine Skid Steer Trencher (A53002)
NEW Wolverine Skid...
 
Top