Price Check Price check CK30 and CK25.....

[jordanh]

I've read many of the threads on here first.

Then I started calling around for qoutes. Unfortunately all of the qoutes I got were for the tractor AND FEL before I learned of the cracking issue... I would not buy unless I could swap in a Koyker unit or equivalent in place of the Kioti loader now.

Anywho.....$16144 for CK30 Hydro with loader then financing or $675 off For a shuttle shift its $15442 and financing or $675 off. these are both with R4's.

I have not yet priced a CK25 but understand they run about $1000-1500 less but have the same set up except 5 less hp and smaller motor.

What are others paying.....leaving out all the implements?

Thanks!

 

[depratt_equip]

If your dealer offers Rhino Loaders i woudl suggest them or Woods... We put alot of Rhino loaders on the Kiotis.

I've read many of the threads on here first.

Then I started calling around for qoutes. Unfortunately all of the qoutes I got were for the tractor AND FEL before I learned of the cracking issue... I would not buy unless I could swap in a Koyker unit or equivalent in place of the Kioti loader now.

Anywho.....$16144 for CK30 Hydro with loader then financing or $675 off For a shuttle shift its $15442 and financing or $675 off. these are both with R4's.

I have not yet priced a CK25 but understand they run about $1000-1500 less but have the same set up except 5 less hp and smaller motor.

What are others paying.....leaving out all the implements?

Thanks!

 

[IslandTractor]

I wouldn't worry so much about the cracking issue at this point and you should consider the advantages of a curved FEL over the dog leg style. Kioti seems to be close to annoucing an engineered fix for the cracking so except for the hassle factor involved that would not dissuade me from choosing the FL130 which is otherwise a very fine loader.

 

[jordanh]

depratt.....I emailed you for a qoute.....btw

 

[depratt_equip]

Should see some numbers here in a bit... thanks!

depratt.....I emailed you for a qoute.....btw

 

[jordanh]

Thanks! Very competitive to quotes I've been getting.

Now.....for those who have bought them.....what have ya'll been paying?

J

 

[MotorSeven]

Oct '05, CK30 FEL HST, $15,900

 

[gravel13]

Nov. '05 CK 25 gear FEL & BH2375 $19,200 (or $19,500 its been a while) delivered and after good old Mass sales tax. Remember prices will vary depending on location, they tend to be higher in New England. Good luck, I have had no regrets and would do it again.

 

[caver]

Seems like an appropriate thread to add this to. I just came back from DeWitt tractor auction
Went out for curiosity since I am on a different schedule this week and had Monday off. Stuck around to see what a new (12 hours) CK25 w/FEL would go for. $10,750

 

[HODAK]

Someone got a good deal. You could throw away the old loader, get the updated loader and still be ahead. That's the thing about auctions - you never know...........