Grading Pricing on Kubota 60" BX24 Plow Blade...

[LBrown59]

Following are list prices from the 07 price book:
BX2763A 60 Snow/Utility Blade Hydraulic Angle $ 1,010.00

BX2762 Skid Shoes required for BX2763. $ 106.00

B2766 Rubber (squeegee) edge to protect surfaces $ 160.00

BX2751 Quick-hitch subframe $ 470.00
This assumes that you have a FEL which provides the hydraulic valve components.

My price was about a 5% discount which is OK with me as dealer assembled the plow and delivered it and I just plain like the guys and want them to make a buck.

The regular price for the Blade,quick hitch and hyd.valve for my BX1500 was $1900 assembled,installed on the tractor and delivered.
I just ordered the skide shoes from my loacal dealer for $116.oo.

 

[LBrown59]

Check out this ad on craigslist, I saw it today. It's from Connecticut so maybe it's within a drive for you.

KUBOTA BX 23 PLOW

Good luck, Rick

This is only about $386 less than new.
Now $800 to $1100 would be more like it.

 

[Jabroni]

Yes, that's within an hour of my house. But the owner isn't willing to come down a little as you suggest.

 

[LBrown59]

Yes, that's within an hour of my house. But the owner isn't willing to come down a little as you suggest.

Well I guess 1200 is still less than a new one for 1586.
Were you going to finace a blade or pay cash for it?
When I Bought mine a new one only cost about 80 bucks more than a used one with the finance charges added to the selling price.

Example New blade 1900 finance charges 0 total cost 1900.
Used blade 1500 finance charges 320 total cost 1820.

If I was financing I'd go new.
If i was paying cash I'd grab that used one if alls good with it.

​

 

[wjmst]

Wes, that is pretty slick. You will have to let us know how well it works.

$600 for the mount seems a little bit "salty", but it looks like a pretty nice setup

Yeah that is what I thought at first, it was about $400 for the quick attach and then $200 for the modification. The other prices around the area were $1500 to $1900, so I didn't think $1000 was too bad then... if it works of course.
Wes

 

[LBrown59]

Yeah that is what I thought at first, it was about $400 for the quick attach and then $200 for the modification. The other prices around the area were $1500 to $1900, so I didn't think $1000 was too bad then... if it works of course.
Wes

Did you get a blade yet?

 

[wjmst]

We haven't had much "plowable" snow since I got the blade, but the little bit that I did mess around seemed like it will work well for me. My dirt lane is very uneven so it is tough to judge how well it really will work, but it sure beats shoveling! Of course, it would work much better on flat cement.

Wes

 

[LBrown59]

We haven't had much "plowable" snow since I got the blade, but the little bit that I did mess around seemed like it will work well for me. My dirt lane is very uneven so it is tough to judge how well it really will work, but it sure beats shoveling! Of course, it would work much better on flat cement.

Wes

Glad you got it.
All We got here was a 4'' snow back in DEC.
The plow and the BX1500 went right through it like butter.
Not much snow for either of us Eh;but there is still plenty of dirt sand gravel slacg Etc to go around .
Yep C-ment would be nice over slag or gravel.

 

[Jabroni]

Did you get a blade yet?

Yeah, I got it about 2 weeks ago. I drove down, and took a look. It was in really good shape. I loaded it in to back of my Tahoe and it's on my BX24 at the moment. I had a little trouble interfacing the plow's hydraulic lines with the tractor. But once i got that figured out, the rest was easy. Now, we haven't had any snow here for the past few weeks. Figures!

 

[LBrown59]

Figures!

But you will be one of these beautiful spring days as you're smothing out that dirt drive with that nice blade.