Problem with NH loader joystick

   / Problem with NH loader joystick #1  

paulw

New member
Joined
Dec 21, 2001
Messages
18
Location
Mooresville, NC area
Tractor
NH TN65 FEL+4x4 and IH 364 (does any body have one of these other than me)
I have a problem with my TN65 NH loader. The joystick control mechanism to tip and roll back the bucket seams to be disconnected. The ball joint appears to be operating OK and the rod that it works moves with the stick but it does work the hydraulic valve. I don’t have a service or parts manual so I don’t want to start taking it apart. In addition, with only 25 hours on the new tractor it should be covered by warranty. The dealer said to bring it into the shop but I don’t have a trailer large enough to haul it and they can’t pick it up as their truck is out of order for a week or so.

It seams like it must be something simple that needs to be reattached. Has anyone experienced a problem with the NH joystick loader control?
 
   / Problem with NH loader joystick
  • Thread Starter
#2  
Sorry I posted this in under the wrong forum topic. I'll post this in the NH section.
 

Tractor & Equipment Auctions

UNUSED LANDHONOR UNIVERSAL ADAPTER PLATE (A50460)
UNUSED LANDHONOR...
(30) TRUSSES - 24-32" X 12'-15' (A50460)
(30) TRUSSES -...
New/Unused Quick Attach Pallet Forks (A48837)
New/Unused Quick...
New/Unused Fuel Pump with 50ft of Hose (A48837)
New/Unused Fuel...
2017 Vermeer SC30TX Stump Grinder (A48837)
2017 Vermeer...
2016 Toro Groundsmaster 3505D 72in Rotary Mower (A48082)
2016 Toro...
 
Top