Programing a Keyless start 773

   / Programing a Keyless start 773 #1  

Knight

Silver Member
Joined
Dec 7, 2008
Messages
237
Location
CT
Tractor
Kubota L3400
I bought a 773, maybe a 2000. It has Keyless start and is unlocked right now. I have a Master code, but need help setting an operator code. I can't seem to find anything out online, as far as the procedure for setting it.
 
   / Programing a Keyless start 773 #2  
Turn panel ON. Select the button next to Tools symbol (hammer & wrench), select button next to Password - Either at the Tools selection or Password the panel will ask for your code. Once correct code is entered it will give options to set up User or Owner password. Follow the screen prompts.
 
   / Programing a Keyless start 773
  • Thread Starter
#3  
After I put in the password, its says push enter. I can't find the enter button. Is it on the screen or is on my display? My display is older and might be worn off.
 
   / Programing a Keyless start 773 #4  
After I put in the password, its says push enter. I can't find the enter button. Is it on the screen or is on my display? My display is older and might be worn off.


"Enter" is the "Run" button.
 

Tractor & Equipment Auctions

2017 Ram 5500 4x4 Utility Truck, VIN # 3C7WRNEL7HG551780 (A48836)
2017 Ram 5500 4x4...
2022 Brush Wolf 4200X 42in Excavator Mower (A50490)
2022 Brush Wolf...
Mahindra 7095 Tractor with Loader (A50490)
Mahindra 7095...
2015 Ford F-550 Auto Crane 4004EH 4,000LB Service Truck (A48081)
2015 Ford F-550...
2025 Kivel 48in Forks and Frame Skid Steer Attachment (A49346)
2025 Kivel 48in...
2012 IC Corporation PB105 Passenger Bus (A48081)
2012 IC...
 
Top