PROJECT BLADE

dirtworksequip · Sep 5, 2008

If anyone is looking for a project blade? I have one available. Check out the TBN classifieds or email me at dirtworksequip@aol.com. I'd like to see someone here put this to good use on a custom blade project. Loader mounted or other project. Then they could post their pics and build here on TBN.

Sincerely Dirt

john_bud · Sep 5, 2008

Would love to adapt that to the front of my tractor. But, you are quite some distance from Taxconsin.

Are those air cylinders or hydraulic? (I don't see a puddle)

jb

kennyd · Sep 5, 2008

I could use some parts off of it...but your about 5hrs away...

dirtworksequip · Sep 5, 2008

John Bud the cylinders are hydraulic. WI really in't too far to go. I bought the blade in IL and then drove up to visit a friend in Madison WI. If you are willing to pay the mileage for delivery, I'd drop it at your door. I think the angle cylinders themselves sell for around $390 each if I'm not mistaken.

KenneyD, you are definately not too far away. Only about 278 miles. I'd drop it at your door for $400.00 if you think you have some use for it.

Sincerely, Dirt

Gizmo2 · Sep 5, 2008

Would you be willing to ship it by way of Yellow Freight?
Stay out of this kennyd!

dirtworksequip · Sep 5, 2008

GIZMO, sure I'll do whatever you need. I can put it on a pallet if that would work with Yellow. Not sure where the closest Yellow Terminal is located though. I can check......you may be able to ship fairly cheap that way. Let me know what you decide.

Sincerely, Dirt

Gizmo2 · Sep 5, 2008

Any freight company would work. Can you check it out?

kennyd · Sep 5, 2008

Gizmo2 said:
Would you be willing to ship it by way of Yellow Freight?
Stay out of this kennyd!

OK I'll back off...But only for you

dirtworksequip · Sep 5, 2008

Gizmo, is there a FedX Freight Terminal near you? I've shipped large items thru them. I can drop it off at a nearby terminal and then you can pick it up at the nearest termnal and save the $50.00 residential delivery charge. Find out what terminal is close to you and I can get you and exact shipping quote early next week.

sincerely, Dirt

WayneB · Sep 6, 2008

For what it is worth I had a plow shipped from NC to NH using Fed-x freight and it was around 600 pounds and the cost was under $370. I picked it up at the terminal. Only problem is they do not have a drive out so had to drop it into the bed of my truck (new truck) and I was a bit sick watching them slide it off from the dock into the truck bed below.

Wayne