PT425 T8 to mini skid (Dingo) adapter?

[m5040]

Sometimes I think about taking a fitting out of the line, weld it closed and drill it out with a smaller diameter to slow it down some.

 

[MossRoad]

Sometimes I think about taking a fitting out of the line, weld it closed and drill it out with a smaller diameter to slow it down some.

They make flow restrictors

 

[airbiscuit]

You sound like my Urologist

 

[MossRoad]

You sound like my Urologist

I needed a flow enhancer!

:laughing:

Just got the meds changed the other day, for that matter. Plenty-O-Flow now. :laughing:

 

[m5040]

Have you done anything with this? If you can't find a cheaper adapter, the Eterra is nice looking. Just get a PT blank adapter for your machine, get the angle off your bucket's mounting area in relation to the ground and have it welded on. That small Dingo adapter cost more then the SSQA to 3pt hitch adapter that I used to make mine.

 

[NC1]

Have you done anything with this? If you can't find a cheaper adapter, the Eterra is nice looking. Just get a PT blank adapter for your machine, get the angle off your bucket's mounting area in relation to the ground and have it welded on. That small Dingo adapter cost more then the SSQA to 3pt hitch adapter that I used to make mine.

Nothing yet, but hopefully I can find time in the next couple of weeks to fool with it.

 

[airbiscuit]

Does that mean you have a plan?

 

[NC1]

Does that mean you have a plan?

I am planning on ordering one of the Eterra Mini Skid adapters and picking up a blank PT female plate when go up to Tazwell. I need to go up there to get a brush cutter anyway.

 

[woodlandfarms]

Don’t just buy one. Implements are very addictive. Qa plates a relatively cheap. I built 5 to begin with and then made another 5 of which 3 are left

 

[airbiscuit]

Take lots of pics and show dimensions of the build.