pto problem

firemen122 · Dec 19, 2005

First Iwould like to say hello to everyone been reading here a while need help. I bought a L4200 4x4 with fel and 1650 hrs. pto lever on r/side by seat has cable runs down to lever on side of tranny lever moves fine. ptodoes not engage found one safety switch on pto lever it is fine, none on seat that i can find. need a few clues where to next first kubota... thanks.... tractor has shuttle shift gst

wushaw · Dec 19, 2005

The lever may move fine but what about the cable it is connected to or not??
Also maybe an adjustment on cable or internal problem.

firemen122 · Dec 20, 2005

everything works great all the way to transmission. Have tried to adjust how much lever swing at xmsn no change. no pto engage no noise or grinding or anything. Thanks again

wushaw · Dec 20, 2005

Then it must be an internal problem and you have two choices.
1. Take to dealer.
2. Get manual and fix yourself if your not mechanically challenged.

firemen122 · Dec 21, 2005

Thank you for your reply. Yes I figured internal, not mechanically challenged. Was hoping somebody here had had a similiar problem and could save me 200 bucks for a repair manual.. Or a minimum of that at a dealer. Thanks everyone for you time and help..