PTO QUESTION

   / PTO QUESTION #1  

bravo2zero

Silver Member
Joined
Feb 11, 2014
Messages
169
Location
Alabama
Tractor
997
I have the JD 5085 with a 8FT pull behind JD bush hog. Question I have is this... I have an Econo Mode or can switch out of Econo mode. Either way it pushes to 540 in either mode. But I notice that in the Econo Mode I don't get as good as a cut. Why is this? Considering either way it's pushing 540 on the PTO?

Thanks
 
   / PTO QUESTION #2  
Is your ground speed the same in both modes? Suspect you are traveling little faster in Econo Mode.
 
   / PTO QUESTION #3  
The only thing I can think of is the pto rpm is dropping off in Econo Mode in heavier cutting requirements. While Econo Mode may deliver 540 rpm it may not have the power of "normal' mode.

A quick call to your JD dealer may provide the answer.
 

Tractor & Equipment Auctions

VERMEER NAVIGATOR 53 D23X30111 DRILL (A51406)
VERMEER NAVIGATOR...
2012 INTERNATIONAL 4300 26 FT BOX TRUCK (A54313)
2012 INTERNATIONAL...
2018 John Deere 245G LC Excavator - Hydraulic Thumb, Tooth Bucket, 56K LB Class (A53473)
2018 John Deere...
2021 GMC SIERRA CREW CAB TRUCK (A51406)
2021 GMC SIERRA...
Как зайти с телефона на кракен. kra39ac.cc  | Kraken зайти на площадку? как пополнить кошелёк? Правила диспута
Как зайти с...
2015 Terex PowerScreen TrakPactor 320 Crusher (A50322)
2015 Terex...
 
Top