Quick attach for FEL yanmar 165D

[millard762]

Anyone know of a quick attach for the FEL on a yanmar 165D? Want to be able to take my bucket off or switch out with ease. Thanks

 

[bmaverick]

Anyone know of a quick attach for the FEL on a yanmar 165D? Want to be able to take my bucket off or switch out with ease. Thanks

see rScotty's post here,
Loader - Yanmar 165D Loader Build

Brand-M help page offers clues,

Add A Loader To My Yanmar Tractor

Every front loader kit will include instructions for physically bolting the loader to the frame of your tractor. These procedures will all be different depending on the loader manufacturer. The instructions below are for connecting the loader's valve to your tractor's hydraulics. Option 'A'The...

brandmparts.com

 

[millard762]

Thanks

 

[careyo63]

JD. Frontier is setup with QC. that's a real simple setup. Easy to attach. If you don't set the pins on the arms you can add or release the Bucket, Forks etc.. Then you don't even have to get out of the seat in doing so. Or leave them off which was pretty much stayed that way.
Old school like my 63 ford aux. off the Crank pully. I can remove FEL. loader with a matter of a few bolts fully intact!. Hyd. resevoir and all. Cut up a Hyd. Sys. to attach a FEL. i've never cared for. The tractor itself goes down. It shows up quite often on here. Broken Hyd. line Ghetto Rigs etc...

Attachments

• 
  Picture 011.jpg

  114 KB · Views: 213
• 
  pump.JPG

  2.1 MB · Views: 281
• 
  1963 Ford.jpg

  1.6 MB · Views: 624

 

[millard762]

I am just talking about a quick attach for a bucket, not for the whole FEL

 

[careyo63]

It's for the Bucket QA, Quick Attach. Not sure that tractor can handle it! Typo I'm notorious for.