Quick question- Rhino oil check

   / Quick question- Rhino oil check #1  

rutwad

Platinum Member
Joined
Jul 28, 2006
Messages
815
Location
Alabama
Tractor
Massey Ferguson 5465, Kubota M5040, Farmall H (2), Minneapolis Moline R, Case 530CK, Cat 416C
When I check the oil in my Rhino, do I screw the dipstick in or not?

THANKS!
 
   / Quick question- Rhino oil check #2  
I don't know anything about the Rhino but anytime you check an oil dipstick for any application it should be fully inserted first.

Cheers,
Mike
 
   / Quick question- Rhino oil check
  • Thread Starter
#3  
mwb said:
I don't know anything about the Rhino but anytime you check an oil dipstick for any application it should be fully inserted first.

Not necessarily. I had a Yamaha ATV and to check the oil you remove the dipstick, wipe, and insert to threads but do not screw in. I had a Kaw. ATV that you did have to screw in. With the low capacity of these engines, that little difference could be alot.
 
   / Quick question- Rhino oil check #5  
The 2006 Rhino I owned did have a screw in dipstick. Some engines you check screwed in some you don't. The Rhino IIRC was not screwed in to check, but some engines you do screw it in to check.
The Yamaha site has free downloadable owner's manuals if you don't have one, rutwad.
 
   / Quick question- Rhino oil check
  • Thread Starter
#6  
Thanks guys. I found my owner's manual.
 

Tractor & Equipment Auctions

2013 Ford Taurus Sedan (A56859)
2013 Ford Taurus...
2014 JCB 930 (A53317)
2014 JCB 930 (A53317)
2017 Green Thumb 58OSN3 8ft Pressure Washer Trailer (A55787)
2017 Green Thumb...
Golf Cart (A55787)
Golf Cart (A55787)
2022 Carry-On 5'x8' Trailer (A53316)
2022 Carry-On...
Club Car Utility Cart (A55853)
Club Car Utility...
 
Top