bruce1966us
Platinum Member
Sounds like the radiator is stopped up.
Radiator Pressure
- Thread starter buppy69
- Start date
- Views: 11286
OP
buppy69
Platinum Member
I will flush it out tomorrow and see what happens. I still can't figure out why it doesn't run hot.
Eugene
Eugene
OP
buppy69
Platinum Member
OK guys, you'll never believe this. I finally flushed out the cooling system. The radiator was not stopped up. The block was, with rust. Looks like someone ran straight water in it before me. When the rust broke loose I had full flow. I let it run in the driveway for 30 minutes with the overflow hose out of the bottle. Not a drop. Put the hose back in the bottle and instantly started blowing coolant out of the vent hole. Took the hose back out, it stopped. I did this repeatedly with the same results. I can touch the block bare handed and not get burned. Is my tractor haunted?
Eugene
Eugene
OP
buppy69
Platinum Member
OK guys, you'll never believe this. I finally flushed out the cooling system. The radiator was not stopped up. The block was, with rust. Looks like someone ran straight water in it before me. When the rust broke loose I had full flow. I let it run in the driveway for 30 minutes with the overflow hose out of the bottle. Not a drop. Put the hose back in the bottle and instantly started blowing coolant out of the vent hole. Took the hose back out, it stopped. I did this repeatedly with the same results. I can touch the block bare handed and not get burned. Is my tractor haunted?
Eugene
Eugene
normde2001
Elite Member
- Joined
- Mar 10, 2002
- Messages
- 4,163
"Put the hose back in the bottle and instantly started blowing coolant out of the vent hole."
What vent hole are you referring to? The only vent I am aware of should have the overflow tube attached to it.
What vent hole are you referring to? The only vent I am aware of should have the overflow tube attached to it.
normde2001
Elite Member
- Joined
- Mar 10, 2002
- Messages
- 4,163
"Put the hose back in the bottle and instantly started blowing coolant out of the vent hole."
What vent hole are you referring to? The only vent I am aware of should have the overflow tube attached to it.
What vent hole are you referring to? The only vent I am aware of should have the overflow tube attached to it.
OP
buppy69
Platinum Member
The vent hole is in the cap of the overflow bottle.
Eugene
Eugene
OP
buppy69
Platinum Member
The vent hole is in the cap of the overflow bottle.
Eugene
Eugene
normde2001
Elite Member
- Joined
- Mar 10, 2002
- Messages
- 4,163
Assuming your 16# cap is good, sounds like you may be back to a bad head gasket. Something is creating high pressure in your system.
normde2001
Elite Member
- Joined
- Mar 10, 2002
- Messages
- 4,163
Assuming your 16# cap is good, sounds like you may be back to a bad head gasket. Something is creating high pressure in your system.
