Rear Axle Spacer Kit?

[TripleR]

Well i did ask both a tractor repair shop and the machine shop that built my spacers about how it might affect the axles, and they felt that for my use "bushhogging" I would never damage my axles flanges and this included the Tigre 1000lb 3point side arm i use. but your are right you should consider what you want to do and is you tractor strong enough to do it. My tractor has been out of warranty for more than 5 years before i used the spacer too.

Yep, some will handle it and some won't, I am sure the tractor repair shop knows what they are talking about.

This is what you need for those really steep places.

 

[Tnbilly]

Just to say...... I purchased the Kubota spacers when I bought my M6040 this year. I haven't used them as yet, with the tires all the way out it hasn't been as bad as I expected. Should anyone seriously want them, feel free to pm me. I'm not actively trying to sell them but if it would help someone out relatively close.

Ron

 

[slowzuki]

I only mention because lots of smaller tractors aren't rated for clamp on duals, which is basically what you've done. I certainly understand modifying stuff as needed though to get the job done!

Well i did ask both a tractor repair shop and the machine shop that built my spacers about how it might affect the axles, and they felt that for my use "bushhogging" I would never damage my axles flanges and this included the Tigre 1000lb 3point side arm i use. but your are right you should consider what you want to do and is you tractor strong enough to do it. My tractor has been out of warrenty for more than 5 years before i used the spacer too.