rear remote hydraulics on a ford 3000

[Jim Thomas]

Need help with a ford 3000. The tractor has 2 remotes on the rear that are both in one housing. I cannot get the hydraulic hose off of the front side of the remote. The hose goes into a sleeve that will just spin around inside the remote fitting when I try to remove it. Any help would be greatly appreciated.

 

[TractorTech]

Welcome to TBN. The banjo bolt screws into the valve through the banjo fitting on the hose. Are you saying that the bolt is spinning in the housing, but not unthreading?

 

[John0829]

Sounds like you are trying to remove the hose from the banjo fitting, take the bolt out instead and the banjo fitting will come off with the hose.