Rear Remotes on a JD4110

[kennyd]

I added 2 rear remotes on my John Deere 4110 CUT, I used the Power Beyond kit from JD to access the hydraulics for the new valve.
The valve I used is a Danfoss valve purchased from the SurplusCenter

The first pic shows the mount I made and welded to ROPS x-bar. Rear View

 

[kennyd]

Front view of the mount...

 

[kennyd]

Test fit of the valve, Front view.

 

[kennyd]

Rear view...

 

[kennyd]

Test fit with the QD's and handles mounted, Front view.

 

[kennyd]

Rear view....

 

[kennyd]

This is the PowerBeyond block ready to install.

 

[kennyd]

RR Tire and DSCV access panel removed, and the DSCV is unbolted the remove existing block that is sandwiched between the DSCV and the transmission.

 

[kennyd]

Rear view, hard so see in there, and even harder to work in the tight space.

 

[kennyd]

It's all plumbed and finished, The vew valve fit perfectly in the small space between the ROPS and the seat.