rebuild selective control valve, JD 750 with 67 loader

   / rebuild selective control valve, JD 750 with 67 loader #11  
Looking at your parts drawing Jim, mine look like part #7 rather than part #10. Haven’t checked closely enough on what sort of sealing arrangement inside but mine have the knurled outer which pulls back.
 
   / rebuild selective control valve, JD 750 with 67 loader #12  
Breakaway coupler(item 7) is part # AL27026 & A WHOPPING $186 USB. If it was my tractor I would be adapting some generic breakaway couplers not the high $$$$$$ ones from JD
 
   / rebuild selective control valve, JD 750 with 67 loader #13  
One can only imagine what the $aud will be then. They do look like they just sit in the block so I wonder if I can get a couple of iso ones that fit. That way I could do away with adapters as all my other gear is iso bar the 2130.
I see a seal and snap ring on the back of the #7, maybe that’s what is letting oil leak through?
 
   / rebuild selective control valve, JD 750 with 67 loader #14  
Hey Jim just checked, would you believe part #7 is only $171 aud?
Cheap as chips, I’ll get a dozen!
 
   / rebuild selective control valve, JD 750 with 67 loader #15  
Here's the JD part # for ISO coupler that fits your tractors bracket AL26972 $38.55 USD
 
   / rebuild selective control valve, JD 750 with 67 loader #16  
I saw that variation there in parts with iso written there.
Here it has been substituted with AL174797. $64. Not worth the time fixing for that price.
 
   / rebuild selective control valve, JD 750 with 67 loader #17  
View attachment 706834

Sure have Zebra. This is what I found.
Also shows this one in my tech manual.
I never knew there was an economy component option.
I guess it will be easier to rebuild as reading shows people have lots of trouble with the small o rings top and bottom of the locking shaft.
Jim, do these economy scv’s work as well or do they have a tendency to remove themselves?
I would think being able to pull out could save me some costly repairs in the long run.
I was replying to the original poster about his valve, not you about your coupler.
 
   / rebuild selective control valve, JD 750 with 67 loader #18  
Sorry for that.
 
   / rebuild selective control valve, JD 750 with 67 loader
  • Thread Starter
#19  
I was replying to the original poster about his valve, not you about your coupler.
@Zebrafive thanks for sharing that info. I've circled back to this project, so will work back to find your post. Will report back as I move forward.
 

Tractor & Equipment Auctions

2015 Lexus RX 350 SUV (A48082)
2015 Lexus RX 350...
4-UNUSED LANDHONOR 45" X 330MM UNIVERSAL BKT PINS (A50460)
4-UNUSED LANDHONOR...
2006 CATERPILLAR D5G LGP CRAWLER DOZER (A50458)
2006 CATERPILLAR...
2019 CATERPILLAR 279D SKID STEER (A50458)
2019 CATERPILLAR...
(1) HD 24ft Free Standing Corral Panel (A48836)
(1) HD 24ft Free...
2006 International 9400i (A50397)
2006 International...
 
Top