remove install 914 A mower deck

[leopard]

Hey guy's I'm new to the tractor community
have a New Holland 1220 with a 914 A mower deck. I'm ready to remove mower deck for the winter due to install rear snow plow. Need some advice where to disconnect the PTO what side.
Thanks,
Leopard

 

[Muhammad]

Welcome to TBN.

 

[ruffdog]

Where the mower pto is connected up at the tractor, there is a ring around the pto, grasp it and pull forward. Your pto shaft should slide forward off the spline. It's easiest if you have no implement on the 3pt at this time so you can lower your mower all the way. Pull your 4 pins to disconnect your mower from the tractor. At this point, I raise the front tires off the ground with the loader(if it's on) or use my high lift jack that way the deck has more room to slide out either side.