Replace Reflective Tape with Lights

   / Replace Reflective Tape with Lights #11  
But you still have the reflective metal triangle right? Maybe that is only a state specific law?
 
   / Replace Reflective Tape with Lights #12  
But you still have the reflective metal triangle right? Maybe that is only a state specific law?
 
   / Replace Reflective Tape with Lights #13  
Sure you can - then the tree limbs will remove your lights /forums/images/graemlins/grin.gif
 
   / Replace Reflective Tape with Lights #14  
Sure you can - then the tree limbs will remove your lights /forums/images/graemlins/grin.gif
 
   / Replace Reflective Tape with Lights
  • Thread Starter
#15  
Yes I still have the reflective triangle on the rear. Just want to remove the reflective tape and replace with lights for more exposure.

Thanks
Randy
 
   / Replace Reflective Tape with Lights
  • Thread Starter
#16  
Yes I still have the reflective triangle on the rear. Just want to remove the reflective tape and replace with lights for more exposure.

Thanks
Randy
 
   / Replace Reflective Tape with Lights #17  
Randy I believe that I understand what you want to accomplish and think your lamps not only a good idea safety wise but also much better protected than the OEM lamps.

Take pictures of your project, please.
 
   / Replace Reflective Tape with Lights #18  
Randy I believe that I understand what you want to accomplish and think your lamps not only a good idea safety wise but also much better protected than the OEM lamps.

Take pictures of your project, please.
 
   / Replace Reflective Tape with Lights #19  
I think the lights would be a nice addition - it appears the fenders were actually molded with lighting in mind - some engineer must have introduced a cost savings in the production process to replace with reflective tape.

Hopefully you can route the wiring in a protected area.

I agree with Pineridge that the fender lights would be better protected than the ROPS lights - I had a tree limb rip the entire housing off on side of my TN - but nothing a little duct tape couldn't take care of.

BTW - Nice looking tractor you have - I like your FEL handle
 
   / Replace Reflective Tape with Lights #20  
I think the lights would be a nice addition - it appears the fenders were actually molded with lighting in mind - some engineer must have introduced a cost savings in the production process to replace with reflective tape.

Hopefully you can route the wiring in a protected area.

I agree with Pineridge that the fender lights would be better protected than the ROPS lights - I had a tree limb rip the entire housing off on side of my TN - but nothing a little duct tape couldn't take care of.

BTW - Nice looking tractor you have - I like your FEL handle
 

Tractor & Equipment Auctions

Payment Terms (MUST READ) (A50775)
Payment Terms...
TC710 FINISHING MOWER (A50459)
TC710 FINISHING...
2018 Dodge Charger Sedan (A50324)
2018 Dodge Charger...
1977 Allis Chalmers 7060 Tractor (A50514)
1977 Allis...
Adams FL24 Fertilizer Conveyor - 24IN Belt, Predator Engine, 2IN Hitch, Refurbished by Manufacturer (A51039)
Adams FL24...
J and L Cargo Express Shadowmaster Enclosed Trailer (A51039)
J and L Cargo...
 
Top