Replacing hydraulic hose - air bubble concern?

   / Replacing hydraulic hose - air bubble concern? #1  

PumpingPete

Bronze Member
Joined
Jul 9, 2013
Messages
59
Location
Fort Scott, KS
Tractor
New Holland Workmaster 55
All:

Had to replace a hydraulic hose that is attached to my grapple and stretches back to my rear remote. Should I be concerned about air pockets or just hook it up and go?
 
   / Replacing hydraulic hose - air bubble concern? #2  
All:

Had to replace a hydraulic hose that is attached to my grapple and stretches back to my rear remote. Should I be concerned about air pockets or just hook it up and go?

Just hook it up and go..it will take a few operations to get the air worked out, but not long.
 
   / Replacing hydraulic hose - air bubble concern? #3  
Hook it up, cycle all the hydraulics through their entire ranges of motion a half dozen times, check the fluid, go to work.
 
   / Replacing hydraulic hose - air bubble concern?
  • Thread Starter
#4  
Thanks everybody! Much appreciated.
 
   / Replacing hydraulic hose - air bubble concern? #5  
Hook it up, cycle all the hydraulics through their entire ranges of motion a half dozen times, check the fluid, go to work.

Correct
 
   / Replacing hydraulic hose - air bubble concern? #6  
I think I would have a replacement hose made up and replace when needed.
 

Tractor & Equipment Auctions

2015 MAC FLATBED 48FT TRAILER (A52141)
2015 MAC FLATBED...
2005 CATERPILLAR 12H MOTOR GRADER (A51406)
2005 CATERPILLAR...
2005 NORAM 65E MOTORGRADER (A52705)
2005 NORAM 65E...
CATERPILLAR 265 SKID STEER (A52705)
CATERPILLAR 265...
(75) 2" X 2" X 8' ANGLE IRON (A54756)
(75) 2" X 2" X 8'...
Year: 2005 Make: Ford Model: Explorer Vehicle Type: Multipurpose Vehicle (MPV) Mileage: Plate: Body (A55788)
Year: 2005 Make...
 
Top