I was thinking that welding hooks or eyes to the top of the deck of an RC might more easily enable positioning of RC for storage by yet to be purchased skid steer QA boom pole and chain. Any concerns about that. Welding won't affect gearbox or anything??
ROTARY CUTTER
- Thread starter flINTLOCK
- Start date
- Views: 1115
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 23,144
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
flINTLOCK said:
That's just mild steel on those cutters. Welding shouldn't adversely affect the steel.
However, it's relatively thin steel (3-16th's to 1/4th, depending on the cutter) so you might want to weld those hooks to a doubler plate, then weld the plate to the cutter deck. That would give you more weld, hence more strength.
You could also consider drilling and using eyebolts as an alternative.
